Laboratory for Bio- and Nano-Instrumentation, Swiss Federal Institute of Technology Lausanne (EPFL), 1015 Lausanne, Switzerland.
UPKIN, Swiss Federal Institute of Technology Lausanne (EPFL), 1015 Lausanne, Switzerland.
Int J Mol Sci. 2018 Sep 30;19(10):2984. doi: 10.3390/ijms19102984.
Imaging living cells by atomic force microscopy (AFM) promises not only high-resolution topographical data, but additionally, mechanical contrast, both of which are not obtainable with other microscopy techniques. Such imaging is however challenging, as cells need to be measured with low interaction forces to prevent either deformation or detachment from the surface. Off-resonance modes which periodically probe the surface have been shown to be advantageous, as they provide excellent force control combined with large amplitudes, which help reduce lateral force interactions. However, the low actuation frequency in traditional off-resonance techniques limits the imaging speed significantly. Using photothermal actuation, we probe the surface by directly actuating the cantilever. Due to the much smaller mass that needs to be actuated, the achievable measurement frequency is increased by two orders of magnitude. Additionally, photothermal off-resonance tapping (PORT) retains the precise force control of conventional off-resonance modes and is therefore well suited to gentle imaging. Here, we show how photothermal off-resonance tapping can be used to study live cells by AFM. As an example of imaging mammalian cells, the initial attachment, as well as long-term detachment, of human thrombocytes is presented. The membrane disrupting effect of the antimicrobial peptide CM-15 is shown on the cell wall of . Finally, the dissolution of the cell wall of by lysozyme is shown. Taken together, these evolutionarily disparate forms of life exemplify the usefulness of PORT for live cell imaging in a multitude of biological disciplines.
通过原子力显微镜(AFM)对活细胞进行成像,不仅可以提供高分辨率的形貌数据,还可以提供机械对比度,而这些都是其他显微镜技术无法获得的。然而,这种成像具有挑战性,因为需要用低相互作用力来测量细胞,以防止细胞变形或从表面脱落。已经证明,周期性探测表面的离共振模式具有优势,因为它们提供了出色的力控制,同时具有较大的振幅,有助于减少侧向力相互作用。然而,传统离共振技术中的低激励频率大大限制了成像速度。我们通过直接激励悬臂梁来探测表面,利用光热激励。由于需要激励的质量小得多,因此可实现的测量频率提高了两个数量级。此外,光热离共振敲击(PORT)保留了传统离共振模式的精确力控制,因此非常适合温和成像。在这里,我们展示了如何使用光热离共振敲击通过 AFM 研究活细胞。作为对哺乳动物细胞成像的示例,展示了人类血小板的初始附着以及长期脱离。抗菌肽 CM-15 对 细胞壁的破坏作用。最后,展示了溶菌酶对 细胞壁的溶解作用。总之,这些在进化上截然不同的生命形式证明了 PORT 在多种生物学领域对活细胞成像的有用性。