Herbaut Mickaël, Zoghlami Aya, Paës Gabriel
Fractionation of AgroResources and Environment (FARE) Laboratory, INRA, University of Reims Champagne-Ardenne, Reims, France.
Biotechnol Biofuels. 2018 Oct 3;11:271. doi: 10.1186/s13068-018-1267-9. eCollection 2018.
Improving lignocellulolytic enzymes' diffusion and accessibility to their substrate in the plant cell walls is recognised as a critical issue for optimising saccharification. Although many chemical features are considered as detrimental to saccharification, enzymes' dynamics within the cell walls remains poorly explored and understood. To address this issue, poplar fragments were submitted to hot water and ionic liquid pretreatments selected for their contrasted effects on both the structure and composition of lignocellulose. In addition to chemical composition and porosity analyses, the diffusion of polyethylene glycol probes of different sizes was measured at three different time points during the saccharification.
Probes' diffusion was mainly affected by probes size and pretreatments but only slightly by saccharification time. This means that, despite the removal of polysaccharides during saccharification, diffusion of probes was not improved since they became hindered by changes in lignin conformation, whose relative amount increased over time. Porosity measurements showed that probes' diffusion was highly correlated with the amount of pores having a diameter at least five times the size of the probes. Testing the relationship with saccharification demonstrated that accessibility of 1.3-1.7-nm radius probes measured by FRAP on non-hydrolysed samples was highly correlated with poplar digestibility together with the measurement of initial porosity on the range 5-20 nm.
Mobility measurements performed before hydrolysis can serve to explain and even predict saccharification with accuracy. The discrepancy observed between probes' size and pores' diameters to explain accessibility is likely due to biomass features such as lignin content and composition that prevent probes' diffusion through non-specific interactions probably leading to pores' entanglements.
提高木质纤维素酶在植物细胞壁中向底物的扩散及可及性被认为是优化糖化过程的关键问题。尽管许多化学特性被视为对糖化不利,但酶在细胞壁内的动态变化仍未得到充分探索和理解。为解决这一问题,对杨树碎片进行了热水和离子液体预处理,这些预处理对木质纤维素的结构和组成具有不同的影响。除了化学成分和孔隙率分析外,还在糖化过程的三个不同时间点测量了不同大小的聚乙二醇探针的扩散情况。
探针的扩散主要受探针大小和预处理的影响,而受糖化时间的影响较小。这意味着,尽管在糖化过程中多糖被去除,但探针的扩散并未得到改善,因为它们受到木质素构象变化的阻碍,而木质素的相对含量随时间增加。孔隙率测量表明,探针的扩散与直径至少为探针大小五倍的孔隙数量高度相关。测试与糖化的关系表明,通过荧光恢复后漂白法(FRAP)在未水解样品上测量的半径为1.3 - 1.7纳米的探针的可及性与杨树的消化率高度相关,同时与5 - 20纳米范围内的初始孔隙率测量结果也高度相关。
水解前进行的迁移率测量可用于准确解释甚至预测糖化过程。观察到的探针大小与孔隙直径之间用于解释可及性的差异可能是由于生物质特性,如木质素含量和组成,它们通过非特异性相互作用阻止探针扩散,可能导致孔隙缠结。