Paës Gabriel, Navarro David, Benoit Yves, Blanquet Senta, Chabbert Brigitte, Chaussepied Bernard, Coutinho Pedro M, Durand Sylvie, Grigoriev Igor V, Haon Mireille, Heux Laurent, Launay Charlène, Margeot Antoine, Nishiyama Yoshiharu, Raouche Sana, Rosso Marie-Noëlle, Bonnin Estelle, Berrin Jean-Guy
1FARE Laboratory, INRA, Université de Reims Champagne-Ardenne, Reims, France.
2INRA, Aix Marseille Univ., UMR1163, BBF, Biodiversité et Biotechnologie Fongiques, Marseille, France.
Biotechnol Biofuels. 2019 Apr 1;12:76. doi: 10.1186/s13068-019-1417-8. eCollection 2019.
Lignocellulose biomass is known as a recalcitrant material towards enzymatic hydrolysis, increasing the process cost in biorefinery. In nature, filamentous fungi naturally degrade lignocellulose, using an arsenal of hydrolytic and oxidative enzymes. Assessment of enzyme hydrolysis efficiency generally relies on the yield of glucose for a given biomass. To better understand the markers governing recalcitrance to enzymatic degradation, there is a need to enlarge the set of parameters followed during deconstruction.
Industrially-pretreated biomass feedstocks from wheat straw, miscanthus and poplar were sequentially hydrolysed following two steps. First, standard secretome from was used to maximize cellulose hydrolysis, producing three recalcitrant lignin-enriched solid substrates. Then fungal secretomes from three basidiomycete saprotrophs ( and ) displaying various hydrolytic and oxidative enzymatic profiles were applied to these recalcitrant substrates, and compared to the secretome. As a result, most of the glucose was released after the first hydrolysis step. After the second hydrolysis step, half of the remaining glucose amount was released. Overall, glucose yield after the two sequential hydrolyses was more dependent on the biomass source than on the fungal secretomes enzymatic profile. Solid residues obtained after the two hydrolysis steps were characterized using complementary methodologies. Correlation analysis of several physico-chemical parameters showed that released glucose yield was negatively correlated with lignin content and cellulose crystallinity while positively correlated with xylose content and water sorption. Water sorption appears as a pivotal marker of the recalcitrance as it reflects chemical and structural properties of lignocellulosic biomass.
Fungal secretomes applied to highly recalcitrant biomass samples can further extend the release of the remaining glucose. The glucose yield can be correlated to chemical and physical markers, which appear to be independent from the biomass type and secretome. Overall, correlations between these markers reveal how nano-scale properties (polymer content and organization) influence macro-scale properties (particle size and water sorption). Further systematic assessment of these markers during enzymatic degradation will foster the development of novel cocktails to unlock the degradation of lignocellulose biomass.
木质纤维素生物质被认为是一种对酶促水解具有抗性的物质,这增加了生物炼制过程的成本。在自然界中,丝状真菌利用一系列水解酶和氧化酶天然降解木质纤维素。酶水解效率的评估通常依赖于给定生物质的葡萄糖产量。为了更好地理解控制对酶促降解抗性的标志物,有必要扩大解构过程中跟踪的参数集。
来自小麦秸秆、芒草和杨树的工业预处理生物质原料分两步进行顺序水解。首先,使用来自[具体来源]的标准分泌组来最大化纤维素水解,产生三种富含抗性木质素的固体底物。然后将来自三种具有不同水解和氧化酶谱的担子菌腐生菌([具体菌种]和[具体菌种])的真菌分泌组应用于这些抗性底物,并与[具体来源]的分泌组进行比较。结果,大部分葡萄糖在第一次水解步骤后释放。在第二次水解步骤后,剩余葡萄糖量的一半被释放。总体而言,两次顺序水解后的葡萄糖产量更多地取决于生物质来源,而不是真菌分泌组的酶谱。使用互补方法对两个水解步骤后获得的固体残留物进行了表征。几个物理化学参数的相关性分析表明,释放的葡萄糖产量与木质素含量和纤维素结晶度呈负相关,而与木糖含量和水吸附呈正相关。水吸附似乎是抗性的关键标志物,因为它反映了木质纤维素生物质的化学和结构性质。
应用于高度抗性生物质样品的真菌分泌组可以进一步扩大剩余葡萄糖的释放。葡萄糖产量可以与化学和物理标志物相关联,这些标志物似乎与生物质类型和分泌组无关。总体而言,这些标志物之间的相关性揭示了纳米尺度性质(聚合物含量和组织)如何影响宏观尺度性质(颗粒大小和水吸附)。在酶促降解过程中对这些标志物进行进一步的系统评估将促进新型混合物的开发,以解开木质纤维素生物质的降解。