Paës Gabriel, Habrant Anouck, Ossemond Jordane, Chabbert Brigitte
FARE laboratory, INRA, Université de Reims Champagne-Ardenne, 51100 Reims, France.
Biotechnol Biofuels. 2017 Jan 14;10:15. doi: 10.1186/s13068-017-0704-5. eCollection 2017.
The lignocellulosic cell wall network is resistant to enzymatic degradation due to the complex chemical and structural features. Pretreatments are thus commonly used to overcome natural recalcitrance of lignocellulose. Characterization of their impact on architecture requires combinatory approaches. However, the accessibility of the lignocellulosic cell walls still needs further insights to provide relevant information.
Poplar specimens were pretreated using different conditions. Chemical, spectral, microscopic and immunolabeling analysis revealed that poplar cell walls were more altered by sodium chlorite-acetic acid and hydrothermal pretreatments but weakly modified by soaking in aqueous ammonium. In order to evaluate the accessibility of the pretreated poplar samples, two fluorescent probes (rhodamine B-isothiocyanate-dextrans of 20 and 70 kDa) were selected, and their mobility was measured by using the fluorescence recovery after photobleaching (FRAP) technique in a full factorial experiment. The mobility of the probes was dependent on the pretreatment type, the cell wall localization (secondary cell wall and cell corner middle lamella) and the probe size. Overall, combinatory analysis of pretreated poplar samples showed that even the partial removal of hemicellulose contributed to facilitate the accessibility to the fluorescent probes. On the contrary, nearly complete removal of lignin was detrimental to accessibility due to the possible cellulose-hemicellulose collapse.
Evaluation of plant cell wall accessibility through FRAP measurement brings further insights into the impact of physicochemical pretreatments on lignocellulosic samples in combination with chemical and histochemical analysis. This technique thus represents a relevant approach to better understand the effect of pretreatments on lignocellulose architecture, while considering different limitations as non-specific interactions and enzyme efficiency.
木质纤维素细胞壁网络由于其复杂的化学和结构特征而对酶解具有抗性。因此,预处理通常用于克服木质纤维素的天然难降解性。表征它们对结构的影响需要组合方法。然而,木质纤维素细胞壁的可及性仍需要进一步深入研究以提供相关信息。
使用不同条件对杨树样本进行预处理。化学、光谱、显微镜和免疫标记分析表明,亚氯酸钠 - 乙酸和水热预处理对杨树细胞壁的改变更大,而在水溶液中浸泡铵对其修饰较弱。为了评估预处理杨树样本的可及性,选择了两种荧光探针(20 kDa和70 kDa的异硫氰酸罗丹明B - 葡聚糖),并在全因子实验中使用光漂白后荧光恢复(FRAP)技术测量它们的流动性。探针的流动性取决于预处理类型、细胞壁定位(次生细胞壁和细胞角中间层)以及探针大小。总体而言,对预处理杨树样本的组合分析表明,即使部分去除半纤维素也有助于提高对荧光探针的可及性。相反,由于可能的纤维素 - 半纤维素塌陷,几乎完全去除木质素对可及性不利。
通过FRAP测量评估植物细胞壁可及性,结合化学和组织化学分析,进一步深入了解了物理化学预处理对木质纤维素样本的影响。因此,该技术是一种相关方法,在考虑非特异性相互作用和酶效率等不同限制的同时,能更好地理解预处理对木质纤维素结构的影响。