Department of Medical Biotechnology, Dongguk University-Bio Medi Campus, 32, Dongguk-ro, Ilsandong-gu, Goyang, Gyeonggi-do, 10326, Republic of Korea.
Department of Medical Devices Industry, 26, Pil-dong 3-ga, Jung-gu, Seoul, 04620, Republic of Korea.
Biomed Eng Online. 2018 Nov 6;17(Suppl 2):151. doi: 10.1186/s12938-018-0586-1.
Intravascular ultrasound (IVUS) is a commonly used diagnostic imaging method for coronary artery disease. Virtual histology (VH) characterizes the plaque components into fibrous tissue (FT), fibro-fatty tissue (FFT), necrotic core (NC), or dense calcium (DC). However, VH can obtain only a single-frame image in one cardiac cycle, and specific software is needed to obtain the radio frequency data. This study proposed a novel intensity-based multi-level classification model for plaque characterization.
The plaque-containing regions between the intima and the media-adventitia were segmented manually for all IVUS frames. A total of 54 features including first order statistics, grey level co-occurrence matrix, Law's energy measures, extended grey level run length matrix, intensity, and local binary pattern were estimated from the plaque-containing regions. After feature extraction, optimal features were selected using principle component analysis (PCA), and these were utilized as the input for the classification models. Plaque components were classified into FT, FFT, NC, or DC using an intensity-based multi-level classification model consisting of three different nets. Net 1 differentiated low-intensity components into FT/FFT and NC/DC groups. Then, net 2 subsequently divided FT/FFT into FT or FFT, whereas the remainder and high-intensity components were classified into NC or DC via net 3. To improve classification accuracy, each net utilized three different input features obtained by PCA. Classification performance was evaluated in terms of sensitivity, specificity, accuracy, and receiver operating characteristic curve.
Quantitative results indicated that the proposed method showed significantly high classification accuracy for all tissue types. The classifiers had classification accuracies of 85.1%, 71.9%, and 77.2%, respectively, and the areas under the curve were 0.845, 0.704, and 0.783. In particular, the proposed method achieved relatively high sensitivity (82.0%) and specificity (87.1%) for differentiating between the FT/FFT and NC/DC groups.
These results confirmed the clinical applicability of the proposed approach for IVUS-based tissue characterization.
血管内超声(IVUS)是一种常用于冠心病的诊断成像方法。虚拟组织学(VH)将斑块成分特征化为纤维组织(FT)、纤维脂肪组织(FFT)、坏死核心(NC)或致密钙(DC)。然而,VH 只能在一个心动周期内获得单个帧图像,并且需要特定的软件来获取射频数据。本研究提出了一种用于斑块特征描述的新型基于强度的多级分类模型。
手动对所有 IVUS 帧的内膜和中膜-外膜之间的斑块包含区域进行分段。从斑块包含区域中估计了总共 54 个特征,包括一阶统计、灰度共生矩阵、Law 的能量度量、扩展灰度运行长度矩阵、强度和局部二值模式。进行特征提取后,使用主成分分析(PCA)选择最佳特征,并将这些特征用作分类模型的输入。使用由三个不同网络组成的基于强度的多级分类模型将斑块成分分类为 FT、FFT、NC 或 DC。网络 1 将低强度成分分为 FT/FFT 和 NC/DC 组。然后,网络 2 进一步将 FT/FFT 分为 FT 或 FFT,而其余部分和高强度成分则通过网络 3 分类为 NC 或 DC。为了提高分类准确性,每个网络都利用 PCA 获得的三个不同输入特征。使用灵敏度、特异性、准确性和接收者操作特征曲线评估分类性能。
定量结果表明,该方法对所有组织类型的分类准确性均较高。分类器的分类准确率分别为 85.1%、71.9%和 77.2%,曲线下面积分别为 0.845、0.704 和 0.783。特别是,该方法在区分 FT/FFT 和 NC/DC 组方面具有较高的灵敏度(82.0%)和特异性(87.1%)。
这些结果证实了该方法在基于 IVUS 的组织特征描述中的临床适用性。