Division of Plastic and Hand Surgery, University Hospital Zürich, ZKF, Zürich, Switzerland.
Institute for Chemical- and Bioengineering, Department of Chemistry and Applied Biosciences, ETH Zürich, Zürich, Switzerland.
J Biomed Mater Res B Appl Biomater. 2019 Aug;107(6):1833-1843. doi: 10.1002/jbm.b.34276. Epub 2018 Nov 21.
Tissue engineering of an osteochondral interface demands for a gradual transition of chondrocyte- to osteoblast-prevailing tissue. If stem cells are used as a single cell source, an appropriate cue to trigger the desired differentiation is the use of composite materials with different amounts of calcium phosphate. Electrospun meshes of poly-lactic-co-glycolic acid and amorphous calcium phosphate nanoparticles (PLGA/aCaP) in weight ratios of 100:0; 90:10, 80:20, and 70:30 were seeded with human adipose-derived stem cells (ASCs) and cultured in DMEM without chemical supplementation. After 2 weeks of static cultivation, they were either further cultivated statically for another 2 weeks (group 1), or placed in a Bose® bioreactor with a flow rate per area of 0.16 mL cm min (group 2). Markers for stem cell criteria, chondrogenesis, osteogenesis, adipogenesis and angiogenesis were analyzed by quantitative real-time PCR. Cell distribution, Sox9 protein expression and proteoglycans were assessed by histology. In group 2 (perfusion culture), chondrogenic Sox9 was upregulated toward the cartilage-mimicking side compared to pure PLGA. On the bone-mimicking side, Sox9 experienced a downregulation, which was confirmed on the protein level. Vice versa, expression of osteocalcin was upregulated on the bone-mimicking side, while it was unchanged on the cartilage-mimicking side. In group 1 (static culture), CD31 was upregulated in the presence of aCaP compared to pure PLGA, whereas Sox9 and osteocalcin expression were not affected. aCaP nanoparticles incorporated in electrospun PLGA drive the differentiation behavior of human ASCs in a dose-dependent manner. Discrete gradients of aCaP may act as promising osteochondral interfaces. © 2018 Wiley Periodicals, Inc. J Biomed Mater Res Part B: Appl Biomater 107B: 1833-1843, 2019.
组织工程学的一个骨软骨界面需要一个逐步过渡的软骨细胞向成骨细胞占主导地位的组织。如果干细胞被用作单一的细胞来源,一个适当的线索来触发所需的分化是使用复合材料具有不同数量的磷酸钙。聚乳酸-共-羟基乙酸和无定形磷酸钙纳米粒子(PLGA/aCaP)的电纺网的重量比为 100:0;90:10、80:20 和 70:30 被接种了人脂肪来源的干细胞(ASCs)并在 DMEM 中培养,不添加化学物质。在静态培养 2 周后,它们要么在静态下再培养 2 周(第 1 组),要么放置在 Bose®生物反应器中,其每面积的流速为 0.16 mL cm min(第 2 组)。通过定量实时 PCR 分析了干细胞标准、软骨形成、成骨、成脂和成血管的标志物。通过组织学评估细胞分布、Sox9 蛋白表达和蛋白聚糖。在第 2 组(灌注培养)中,与纯 PLGA 相比,软骨模拟侧的 Sox9 上调了软骨形成。在骨模拟侧,Sox9 的表达下调,这在蛋白质水平上得到了证实。相反,骨钙素的表达在骨模拟侧上调,而在软骨模拟侧不变。在第 1 组(静态培养)中,与纯 PLGA 相比,aCaP 存在时 CD31 上调,而 Sox9 和骨钙素的表达不受影响。电纺 PLGA 中掺入的 aCaP 纳米颗粒以剂量依赖的方式驱动人 ASC 的分化行为。离散梯度的 aCaP 可能作为有前途的骨软骨界面。©2018 Wiley Periodicals,Inc. J Biomed Mater Res Part B:Appl Biomater 107B:1833-1843,2019。