Investigation of Electrical Characteristics on AP-PECVD Fabricated Amorphous IGZO TFTs with Hydrogen Plasma Treatment.

TFT panel production process can be divided into three kinds of technology. There have amorphous silicon (a-Si), low-temperature polysilicon (LTPS) and amorphous IGZO (a-IGZO) oxide. Traditional amorphous silicon (a-Si) silicon has a lot of advantages such as good productivity, short process and low-cost. It also has a lot of shortcomings on these applications on TFTs such as photosensitivity, light degradation, and opacity, etc. The dispute of the material based on a-Si:H as an active layer in TFT is low field effect mobility (1 cm²/V·S) (M. Shur and M. Hack, 55, 3831 (1984)), photo sensitivity (low band gap about 1.7 V) and high deposition temperature (400 °C) (M. Shur, et al., 66, 3371 (1989); K. khakzar and E. H. Lueder, 39, 1438 (1992)). Amorphous In-Ga-Zn-O (IGZO) had attracted attention that compared with the conventional a-Si:H, in the past three years, a-IGZO thin film transistors is more popular which compared with the other oxide semiconductors, because of its larger n/ ratio (>10, smaller subthreshold swing (SS), better field-effect mobility and better stability against electrical stress. Hydrogen plasma treatment is applied in improving a-IGZO TFTs active layer, which is fabricated by atmospheric pressure-plasma enhanced chemical vapor deposition (AP-PECVD), the electrical characteristics of a-IGZO TFTs is investigated.