Department of Chemistry, North Carolina State University, 2620 Yarbrough Drive, Raleigh, NC 27695, USA.
Beijing Nuclear Magnetic Resonance Center and College of Chemistry and Molecular Engineering, Peking University, 5 Yiheyuan Road, Haidian, Beijing 100871, People's Republic of China.
J Magn Reson. 2019 Jan;298:115-126. doi: 10.1016/j.jmr.2018.12.004. Epub 2018 Dec 5.
Over the past decades pulsed electron-electron double resonance (PELDOR), often called double electron-electron resonance (DEER), became one of the major spectroscopic tools for measurements of nanometer-scale distances and distance distributions in non-crystalline biological and chemical systems. The method is based on detecting the amplitude of the primary (3-pulse DEER) or refocused (4-pulse DEER) spin echo for the so-called "observer" spins when the other spins coupled to the former by a dipolar interaction are flipped by a "pump" pulse at another EPR frequency. While the timing of the pump pulse is varied in steps, the positions of the observer pulses are typically fixed. For such a detection scheme the total length of the observer pulse train and the electron spin memory time determine the amplitude of the detected echo signal. Usually, the distance range considerations in DEER experiments dictate the total length of the observer pulse train to exceed the phase memory time by a factor of few and this leads to a dramatic loss of the signal-to-noise ratio (SNR). While the acquisition of the DEER signal seems to be irrational under such conditions, it is currently the preferred way to conduct DEER because of an effective filtering out of all other unwanted interactions. Here we propose a novel albeit simple approach to improve DEER sensitivity and decrease data acquisition time by introducing the signal acquisition scheme based on RELaxation Optimized Acquisition (Length) Distribution (DEER-RELOAD). In DEER-RELOAD the dipolar phase evolution signal is acquired in multiple segments in which the observer pulses are fixed at the positions to optimize SNR just for that specific segment. The length of the segment is chosen to maximize the signal acquisition efficiency according the phase relaxation properties of the spin system. The total DEER trace is then obtained by "stitching" the multiple segments into a one continuous trace. The utility of the DEER-RELOAD acquisition scheme has been demonstrated on an example of the standard 4-pulse DEER sequence applied to two membrane protein complexes labeled with nitroxides. While theoretical gains from the DEER-RELOAD scheme increase with the number of stitched segments, in practice, even dividing the acquisition of the DEER trace into two segments may improve SNR by a factor of >3, as it has been demonstrated for one of these two membrane proteins.
在过去的几十年中,脉冲电子-电子双共振(PELDOR),通常称为双电子-电子共振(DEER),已成为测量非晶态生物和化学系统中纳米级距离和距离分布的主要光谱工具之一。该方法基于检测所谓的“观测”自旋的初级(3 脉冲 DEER)或重聚焦(4 脉冲 DEER)自旋回波的幅度,当其他自旋通过偶极相互作用与前一个自旋耦合时,用另一个 EPR 频率的“泵浦”脉冲翻转。虽然泵浦脉冲的定时以步长变化,但观测器脉冲的位置通常是固定的。对于这种检测方案,观测器脉冲序列的总长度和电子自旋记忆时间决定了检测到的回波信号的幅度。通常,在 DEER 实验中的距离范围考虑因素要求观测器脉冲序列的总长度超过相位记忆时间的几倍,这导致信号噪声比(SNR)的急剧下降。虽然在这种情况下,DEER 信号的采集似乎是不合理的,但由于有效地过滤掉所有其他不需要的相互作用,它目前是进行 DEER 的首选方法。在这里,我们提出了一种新颖的、简单的方法来提高 DEER 的灵敏度并减少数据采集时间,该方法通过引入基于弛豫优化采集(长度)分布(DEER-RELOAD)的信号采集方案。在 DEER-RELOAD 中,在多个段中采集偶极相演化信号,其中观测器脉冲固定在优化 SNR 的位置,仅针对该特定段。根据自旋系统的相弛豫特性,选择段的长度以最大化信号采集效率。然后通过将多个段“拼接”成一个连续的迹线来获得总 DEER 迹线。DEER-RELOAD 采集方案的实用性已在应用于用氮氧化物标记的两个膜蛋白复合物的标准 4 脉冲 DEER 序列的示例中得到证明。虽然 DEER-RELOAD 方案的理论增益随拼接段的数量增加,但实际上,即使将 DEER 迹线的采集分成两段,也可以将 SNR 提高因子>3,如对其中一种膜蛋白所示。