Chemical Sciences Division, CSIR-Indian Institute of Petroleum, Dehradun 248005, India; Academy of Scientific and Innovative Research (AcSIR), New Delhi 110001, India.
Chemical Sciences Division, CSIR-Indian Institute of Petroleum, Dehradun 248005, India.
J Colloid Interface Sci. 2019 May 1;543:201-213. doi: 10.1016/j.jcis.2019.02.061. Epub 2019 Feb 20.
A substantially improved methanol yield was achieved from the photoreduction of carbon dioxide under visible light by using a hybrid photocatalyst consisting of molecular cobalt phthalocyanine tetracarboxylic acid (CoPc-COOH) complex immobilized to the organic semiconductor graphitic carbon nitride (g-CN) and triethylamine as sacrificial electron donor. The structural and morphological features of the hybrid photocatalyst determined by various techniques like FTIR, UV-Vis, Raman, XPS, TGA, BET etc. After 24 h of light irradiation, the methanol yield by using g-CN/CoPc-COOH photocatalyst (50 mg) was found to be 646.5 µmol gcat or 12.9 mmol gcat with conversion rate 538.75 µmol h gcat. However, the use of homogeneous CoPc-COOH (6.5 µmol Co, equivalent to g-CN/CoPc-COOH) and g-CN (50 mg) provided 88.5 μmol (1770 μmol gcat) and 59.2 μmol (1184 μmol gcat) yield of methanol, respectively under identical conditions. The improved photocatalytic efficiency of the hybrid was attributed to the binding ability of CoPc-COOH to CO that provided the higher CO concentration on the support. Further, the semiconductor support provided better electron mobility and charge separation with the integrated benefit of facile recovery and recycling of the material at the end of the reduction process.
通过使用固定在有机半导体石墨相氮化碳(g-CN)上的分子钴酞菁四羧酸(CoPc-COOH)配合物和三乙胺作为牺牲电子供体的复合光催化剂,在可见光下实现了二氧化碳光还原制甲醇产率的显著提高。通过各种技术(如 FTIR、UV-Vis、拉曼、XPS、TGA、BET 等)确定了复合光催化剂的结构和形态特征。在光照 24 小时后,使用 g-CN/CoPc-COOH 光催化剂(50mg)的甲醇产率为 646.5µmol gcat 或 12.9mmol gcat,转化率为 538.75µmol h gcat。然而,在相同条件下,使用均相 CoPc-COOH(6.5µmol Co,相当于 g-CN/CoPc-COOH)和 g-CN(50mg)分别提供了 88.5µmol(1770µmol gcat)和 59.2µmol(1184µmol gcat)的甲醇产率。复合光催化剂的光催化效率提高归因于 CoPc-COOH 与 CO 的结合能力,这提供了载体上更高的 CO 浓度。此外,半导体载体提供了更好的电子迁移率和电荷分离,最终在还原过程结束时,材料易于回收和再循环。