Palanisamy Mohandass, David Khanna, Durai Manigandan, Bhalla Narendra, Puri Abhishek
Department of Physics, School of Engineering and Technology, Karunya Institute of Technology and Sciences, Coimbatore, Tamilnadu, India.
Department of Radiation Oncology, Fortis Cancer Institute, Fortis Hospital, Mohali, Punjab, India.
Rep Pract Oncol Radiother. 2019 Mar-Apr;24(2):188-199. doi: 10.1016/j.rpor.2019.01.005. Epub 2019 Feb 18.
To study the dosimetric impact of statistical uncertainty (SU) per plan on Monte Carlo (MC) calculation in Monaco™ treatment planning system (TPS) during volumetric modulated arc therapy (VMAT) for three different clinical cases.
During MC calculation SU is an important factor to decide dose calculation accuracy and calculation time. It is necessary to evaluate optimal acceptance of SU for quality plan with reduced calculation time.
Three different clinical cases as the lung, larynx, and prostate treated using VMAT technique were chosen. Plans were generated with Monaco™ V5.11 TPS with 2% statistical uncertainty. By keeping all other parameters constant, plans were recalculated by varying SU, 0.5%, 1%, 2%, 3%, 4%, and 5%. For plan evaluation, conformity index (CI), homogeneity index (HI), dose coverage to PTV, organ at risk (OAR) dose, normal tissue receiving dose ≥5 Gy and ≥10 Gy, integral dose (NTID), calculation time, gamma pass rate, calculation reproducibility and energy dependency were analyzed.
CI and HI improve as SU increases from 0.5% to 5%. No significant dose difference was observed in dose coverage to PTV, OAR doses, normal tissue receiving dose ≥5 Gy and ≥10 Gy and NTID. Increase of SU showed decrease in calculation time, gamma pass rate and increase in PTV max dose. No dose difference was seen in calculation reproducibility and dependent on energy.
For VMAT plans, SU can be accepted from 1% to 3% per plan with reduced calculation time without compromising plan quality and deliverability by accepting variations in point dose within the target.
研究在容积调强弧形放疗(VMAT)过程中,针对三种不同临床病例,Monaco™治疗计划系统(TPS)中每个计划的统计不确定性(SU)对蒙特卡罗(MC)计算的剂量学影响。
在MC计算过程中,SU是决定剂量计算准确性和计算时间的重要因素。有必要评估SU的最佳接受度,以制定计算时间缩短的高质量计划。
选择采用VMAT技术治疗的三种不同临床病例,即肺癌、喉癌和前列腺癌。使用Monaco™ V5.11 TPS生成具有2%统计不确定性的计划。在保持所有其他参数不变的情况下,通过改变SU(0.5%、1%、2%、3%、4%和5%)对计划进行重新计算。对于计划评估,分析了适形指数(CI)、均匀性指数(HI)、靶区适形度、危及器官(OAR)剂量、接受≥5 Gy和≥10 Gy剂量的正常组织、积分剂量(NTID)、计算时间、伽马通过率、计算可重复性和能量依赖性。
随着SU从0.5%增加到5%,CI和HI有所改善。在靶区适形度、OAR剂量、接受≥5 Gy和≥10 Gy剂量的正常组织以及NTID方面,未观察到显著的剂量差异。SU的增加显示计算时间减少、伽马通过率降低以及靶区最大剂量增加。在计算可重复性方面未观察到剂量差异,且与能量无关。
对于VMAT计划,每个计划的SU可接受范围为1%至3%,通过接受靶区内点剂量的变化,在不影响计划质量和可交付性的情况下缩短计算时间。