Korea Advanced Institute of Science and Technology, Department of Materials Science and Engineering, 291 Daehak-ro, Yuseong-gu, Daejeon, 34141, Republic of Korea.
Hanyang University, Department of Electronic Engineering, 222, Wangsimni-ro, Seongdong-gu, Seoul, 04763, Republic of Korea.
Sci Rep. 2019 Mar 1;9(1):3216. doi: 10.1038/s41598-019-40005-x.
The fingerprint recognition has been widely used for biometrics in mobile devices. Existing fingerprint sensors have already been commercialized in the field of mobile devices using primarily Si-based technologies. Recently, mutual-capacitive fingerprint sensors have been developed to lower production costs and expand the range of application using thin-film technologies. However, since the mutual-capacitive method detects the change of mutual capacitance, it has high ratio of parasitic capacitance to ridge-to-valley capacitance, resulting in low sensitivity, compared to the self-capacitive method. In order to demonstrate the self-capacitive fingerprint sensor, a switching device such as a transistor should be integrated in each pixel, which reduces a complexity of electrode configuration and sensing circuits. The oxide thin-film transistor (TFT) can be a good candidate as a switching device for the self-capacitive fingerprint sensor. In this work, we report a systematic approach for self-capacitive fingerprint sensor integrating Al-InSnZnO TFTs with field-effect mobility higher than 30 cm/Vs, which enable isolation between pixels, by employing industry-friendly process methods. The fingerprint sensors are designed to reduce parasitic resistance and capacitance in terms of the entire system. The excellent uniformity and low leakage current (<10) of the oxide TFTs allow successful capture of a fingerprint image.
指纹识别已广泛应用于移动设备的生物识别技术中。现有的指纹传感器已经在移动设备领域通过使用基于硅的技术实现了商业化。最近,互电容指纹传感器已经被开发出来,以降低生产成本并通过薄膜技术扩展应用范围。然而,由于互电容方法检测互电容的变化,与自电容方法相比,它具有较高的寄生电容与脊谷电容的比值,因此灵敏度较低。为了演示自电容指纹传感器,每个像素都应该集成一个开关器件,如晶体管,这可以降低电极配置和传感电路的复杂性。氧化物薄膜晶体管(TFT)可以作为自电容指纹传感器的开关器件的一个很好的选择。在这项工作中,我们报告了一种系统的方法,用于集成场效应迁移率高于 30cm/Vs 的 Al-InSnZnO TFT 的自电容指纹传感器,通过采用工业友好的工艺方法实现像素之间的隔离。指纹传感器的设计旨在降低整个系统中的寄生电阻和电容。氧化物 TFT 的优异均匀性和低漏电流(<10)允许成功捕获指纹图像。