Science and Technology on Electronic Test and Measurement Laboratory, North University of China, Tai Yuan, 030051, China.
Sci Rep. 2019 Mar 8;9(1):3916. doi: 10.1038/s41598-019-40828-8.
We propose a flexible wireless pressure sensor, which uses a graphene/polydimethylsiloxane (GR/PDMS) sponge as the dielectric layer. The sponge is sandwiched between two surfaces of a folded flexible printed circuit with patterned Cu as the antenna and electrode. By adjusting graphene and NHHCO concentrations, a composite with 20% concentration of NHHCO and 2% concentration of graphene as the dielectric layer is obtained, which exhibits high sensitivity (2.2 MHz/kPa), wide operating range (0-500 kPa), rapid response time (~7 ms), low detection limit (5 Pa), and good stability, recoverability, and repeatability. In addition, the sensor is sensitive to finger bending and facial muscle movements for smile and frown, that are transmitted using wireless electromagnetic coupling; therefore, it has potential for a wide range of applications such as intelligent robots, bionic-electronic skin and wearable electronic devices.
我们提出了一种灵活的无线压力传感器,它使用石墨烯/聚二甲基硅氧烷(GR/PDMS)海绵作为介电层。该海绵夹在具有图案化 Cu 作为天线和电极的折叠式柔性印刷电路板的两个表面之间。通过调整石墨烯和 NHHCO 的浓度,获得了一种以 20%浓度的 NHHCO 和 2%浓度的石墨烯作为介电层的复合材料,该复合材料表现出高灵敏度(2.2 MHz/kPa)、宽工作范围(0-500 kPa)、快速响应时间(~7 ms)、低检测限(5 Pa)和良好的稳定性、可恢复性和可重复性。此外,该传感器对用于微笑和皱眉的手指弯曲和面部肌肉运动敏感,这些运动通过无线电磁耦合进行传输;因此,它具有广泛的应用潜力,如智能机器人、仿生电子皮肤和可穿戴电子设备。