School of Mechanical Engineering and Automation, Fuzhou University, Fuzhou 350108, Fujian, China.
Phys Chem Chem Phys. 2019 Apr 3;21(14):7454-7461. doi: 10.1039/c8cp07158f.
The hysteresis phenomenon frequently arises in two-dimensional (2D) material nanoindentation, which is generally expected to be excluded from characterizing the elastic properties due to the imperfect elastic behaviour. However, the underlying mechanism of hysteresis and its effect on the characterization of the mechanical properties of 2D materials remain unclear. Cyclic loadings are exerted on the suspended monolayer molybdenum-disulfide (MoS2) films in atomic force microscopy (AFM) nanoindentation experiments. The elastic hysteresis loops are observed for most of the force-displacement curves. The friction/wear between the AFM silicon tip and the MoS2 monolayer is deemed to be dominant compared to the friction between the monolayer and the silicon dioxide substrate after the analysis, as determined using the finite element method (FEM) simulation. The loading force-displacement curves instead of the unloading curves have been used to deduce the elastic mechanical properties using a modified regression equation. The mean value of the obtained Young's modulus of monolayer MoS2, E, is equal to 209 ± 18 GPa, which is close to the inherent stiffness value, predicted by first principles calculation. Our results have confirmed that it is not obligatory to exclude the sample data with hysteresis behaviour for characterizing the elastic properties of 2D materials. In addition, all sample sheets have finally been penetrated and the mean breaking stress value, σmax, is 36.6 ± 0.9 GPa, determined using the radius value of the worn tip. Furthermore, the effect of the loading force and the shape/size of the suspended monolayer MoS2 sheets on the hysteresis behaviour in the 2D nanoindentation have also been analyzed and discussed, exhibiting interesting trends. Our findings provide guidance for the characterization of the mechanical properties of 2D materials using the AFM nanoindentation and the experimental samples with elastic hysteresis behaviour.
二维(2D)材料纳米压痕中经常出现滞后现象,由于弹性行为不完善,通常期望排除该滞后现象来表征弹性性能。然而,滞后的潜在机制及其对 2D 材料力学性能表征的影响仍不清楚。在原子力显微镜(AFM)纳米压痕实验中,对悬浮单层二硫化钼(MoS2)薄膜施加循环载荷。在大多数力-位移曲线中观察到弹性滞后环。分析后发现,与单层和二氧化硅衬底之间的摩擦相比,AFM 硅尖端和 MoS2 单层之间的摩擦/磨损被认为更为重要,这是使用有限元法(FEM)模拟确定的。使用改进的回归方程,已使用加载力-位移曲线而不是卸载曲线来推断弹性力学性能。获得的单层 MoS2 的杨氏模量 E 的平均值为 209 ± 18 GPa,接近第一性原理计算预测的固有刚度值。我们的结果证实,对于表征 2D 材料的弹性性能,不必排除具有滞后行为的样品数据。此外,所有样品薄片最终都被穿透,使用磨损尖端的半径值确定平均断裂应力值 σmax 为 36.6 ± 0.9 GPa。此外,还分析和讨论了加载力和悬浮单层 MoS2 薄片的形状/尺寸对 2D 纳米压痕中滞后行为的影响,表现出有趣的趋势。我们的研究结果为使用 AFM 纳米压痕和具有弹性滞后行为的实验样品来表征 2D 材料的力学性能提供了指导。