1 Department of Mechanics, Shanghai University , Shanghai , People's Republic of China.
2 Department of Materials Science and Engineering, University of Washington Seattle , Seattle, WA , USA.
J R Soc Interface. 2019 Jan 31;16(150):20180775. doi: 10.1098/rsif.2018.0775.
Fish scales are laminated composites that consist of plies of unidirectional collagen fibrils with twisted-plywood stacking arrangement. Owing to their composition, the toughness of scales is dependent on the intermolecular bonding within and between the collagen fibrils. Adjusting the extent of this bonding with an appropriate stimulus has implications for the design of next-generation bioinspired flexible armours. In this investigation, scales were exposed to environments of water or a polar solvent (i.e. ethanol) to influence the extent of intermolecular bonding, and their mechanical behaviour was evaluated in uniaxial tension and transverse puncture. Results showed that the resistance to failure of the scales increased with loading rate in both tension and puncture and that the polar solvent treatment increased both the strength and toughness through interpeptide bonding; the largest increase occurred in the puncture resistance of scales from the tail region (a factor of nearly 7×). The increase in strength and damage tolerance with stronger intermolecular bonding is uncommon for structural materials and is a unique characteristic of the low mineral content. Scales from regions of the body with higher mineral content underwent less strengthening, which is most likely the result of interference posed by the mineral crystals to intermolecular bonding. Overall, the results showed that flexible bioinspired composite materials for puncture resistance should enrol constituents and complementary processing that capitalize on interfibril bonds.
鱼鳞是层状复合材料,由具有扭曲胶合板堆积排列的各向异性胶原纤维层组成。由于其组成,鳞片的韧性取决于胶原纤维内部和之间的分子间键合。通过适当的刺激来调整这种键合的程度,对于设计下一代仿生柔性盔甲具有重要意义。在这项研究中,将鳞片暴露在水或极性溶剂(例如乙醇)环境中,以影响分子间键合的程度,并在单轴拉伸和横向刺穿中评估它们的机械性能。结果表明,在拉伸和刺穿中,鳞片的失效阻力随加载速率的增加而增加,极性溶剂处理通过肽间键合增加了强度和韧性;尾部鳞片的刺穿阻力增加最大(近 7 倍)。这种随着更强的分子间键合而增加的强度和损伤容限的增加对于结构材料来说并不常见,是低矿物质含量的独特特征。身体部位矿物质含量较高的鳞片的强化程度较低,这很可能是矿物质晶体对分子间键合的干扰造成的。总的来说,研究结果表明,用于抗刺穿的柔性仿生复合材料应该利用纤维间键合来利用组成和互补的处理方法。