Suppr超能文献

在离体人皮肤角质层薄片中同时测量结构与水渗透性

Simultaneous Measurements of Structure and Water Permeability in an Isolated Human Skin Stratum Corneum Sheet.

作者信息

Nakazawa Hiromitsu, Imai Tomohiro, Suzuki Mika, Akakabe Natsuki, Hatta Ichiro, Kato Satoru

机构信息

School of Science and Technology, Kwansei Gakuin University, Sanda 669-1337, Japan.

Department of Research, Nagoya Industrial Science Research Institute, Nagoya 460-0008, Japan.

出版信息

Polymers (Basel). 2019 May 8;11(5):829. doi: 10.3390/polym11050829.

Abstract

Stratum corneum (SC), the outermost layer of human skin, acts as an intelligent physicochemical interface between the inside and the outside of our body. To make clear the relationship between structure and physical barrier properties of SC, we developed a method that enables us to simultaneously acquire X-ray diffraction (XD) patterns and transepidermal water loss (TEWL) values using a spread SC sheet isolated from human skin. The synchrotron X-ray was incident on the SC sheet surface at an angle of 45° to avoid interference between the two kinds of measurements. Detailed comparison between XD and TEWL data suggested that the thermal behavior of water permeability is closely related to the thermal expansion of the lattice spacings of the hexagonal phases above 40 °C and to the existence ratio of the orthorhombic phase below 40 °C. Thus, the new method we developed can give useful information on the mechanism of water permeation in SC without ambiguity caused by separate measurements of structure and water permeability with different samples.

摘要

角质层(SC)是人体皮肤的最外层,作为我们身体内外之间的智能物理化学界面。为了明确SC的结构与物理屏障特性之间的关系,我们开发了一种方法,该方法能够使用从人体皮肤分离的展开SC片材同时获取X射线衍射(XD)图谱和经表皮水分流失(TEWL)值。同步加速器X射线以45°角入射到SC片材表面,以避免两种测量之间的干扰。XD和TEWL数据之间的详细比较表明,水渗透性的热行为与40°C以上六方相晶格间距的热膨胀以及40°C以下正交相的存在比例密切相关。因此,我们开发的新方法可以提供关于SC中水渗透机制的有用信息,而不会因使用不同样品分别测量结构和水渗透性而产生歧义。

https://cdn.ncbi.nlm.nih.gov/pmc/blobs/f068/6571694/a0f3c5304aa2/polymers-11-00829-g001.jpg

文献AI研究员

20分钟写一篇综述,助力文献阅读效率提升50倍。

立即体验

用中文搜PubMed

大模型驱动的PubMed中文搜索引擎

马上搜索

文档翻译

学术文献翻译模型,支持多种主流文档格式。

立即体验