School of Mechanism and Electrical Engineering, Guilin University of Electronic Technology, Guilin 541004, China.
School of Mechanism and Electrical Engineering, Guilin University of Electronic Technology, Guilin 541004, China.
Sci Total Environ. 2019 Apr 1;659:1415-1427. doi: 10.1016/j.scitotenv.2018.12.344. Epub 2018 Dec 24.
Ultraviolet (UV) disinfection is an early discovered technology that is currently and widely used for water treatment and food hygiene treatment. A newly emerging technology of UV disinfection, that is, UV light-emitting diodes (UV-LEDs), has aroused considerable research attention. UV-LEDs feature numerous advantages compared with traditional UV mercury vapor lamps and are expected to replace traditional UV lamps. Researchers currently perform studies to obtain data and develop methods for UV-LED water treatment systems. This article analyzes the latest research status and discusses the types of inactivation factors, such as the wavelength selectivity of UV light source, control of UV dose, effect of inactivation rate constant (K) (cm/mJ), working mode of water sample, external auxiliary system, and UV sensitivity of pathogenic bacteria in water. The wavelengths of approximately 260 and 280 nm normally feature strong inactivation characteristics. When compared with the approximately 260 nm wavelength chip, the around 280 nm wavelength chip proves to be a better choice as its higher wavelength light power can result in faster disinfection capacity of bacteria. UV dose can also be used as the reference value for disinfection of drinking water, whereas the inactivation rate constant (K) (cm/mJ) varies with different microorganism internal structures. Changing the working mode or adding an auxiliary system can also enhance the inactivation effect in water treatment system settings. In addition, we can compare the inactivation capacities of several pathogens as follows: ΦX174 > Escherichia coli > T type bacteriophage >Bacillus subtilis > MS2 or Qβ > human adenovirus. The in-depth investigation and discussion of inactivation factors and the mechanism of action in UV-LEDs water treatment systems will establish a more efficient UV-LED disinfection method in the future, provide a guiding direction, and promote the standardization and normalization of pathogen inactivation mechanism in UV-LED water treatment systems.
紫外线(UV)消毒是一种早期发现的技术,目前广泛应用于水处理和食品卫生处理。一种新兴的紫外线消毒技术,即紫外线发光二极管(UV-LED),引起了相当多的研究关注。UV-LED 与传统的紫外线汞蒸气灯相比具有许多优势,有望取代传统的紫外线灯。研究人员目前正在进行研究,以获取数据并开发 UV-LED 水处理系统的方法。本文分析了最新的研究现状,并讨论了紫外线光源波长选择性、紫外线剂量控制、灭活速率常数(K)(cm/mJ)的影响、水样工作模式、外部辅助系统以及水中致病菌的紫外线敏感性等灭活因子的类型。波长约为 260 和 280nm 通常具有较强的灭活特性。与约 260nm 波长芯片相比,约 280nm 波长芯片证明是更好的选择,因为其较高的波长光功率可以使细菌更快地消毒。紫外线剂量也可用作饮用水消毒的参考值,而灭活速率常数(K)(cm/mJ)随不同微生物内部结构而变化。改变工作模式或添加辅助系统也可以增强水处理系统设置中的灭活效果。此外,我们可以比较几种病原体的灭活能力如下:ΦX174>大肠杆菌>T 型噬菌体>枯草芽孢杆菌>MS2 或 Qβ>人腺病毒。深入研究和讨论 UV-LED 水处理系统中的灭活因子和作用机制,将在未来建立更有效的 UV-LED 消毒方法,提供指导方向,并促进 UV-LED 水处理系统中病原体灭活机制的标准化和规范化。