Ahmed Samia A, Saleh Shireen A A, Abdel-Hameed Salwa A M, Fayad Amira M
Chemistry of Natural and Microbial Products Department, National Research Centre, Dokki, Cairo, Egypt.
Glass Research Department, National Research Centre, Dokki, Cairo, Egypt.
Heliyon. 2019 May 9;5(5):e01674. doi: 10.1016/j.heliyon.2019.e01674. eCollection 2019 May.
314 strain was able to utilize agricultural and industrial wastes for metallo-protease production. Orange peel and wheat bran were found as the most suitable carbon and nitrogen sources, respectively. Optimized production process enhanced the enzyme production by 5.1-folds. Glass and glass-ceramic with different particle sizes based on mica were used as inorganic carrier. Protease enzyme was immobilized by covalent bonding and physical adsorption methods on nanoparticle supports. Enzyme physically adsorbed on glass ceramic (particle size 0.71-1.0 mm) had the highest residual activity and the highest immobilization yield. Glass-ceramic was characterized by X-ray diffraction (XRD) and scanning electron microscopy (SEM). Immobilized enzyme exhibited activation energy ( ) and deactivation rate constant at 60 °C ( ) about 1.29 and 1.46-times, respectively lower than free enzyme. Moreover, adsorbed enzyme had higher energy for denaturation ( ), half-life ( ), and decimal reduction time (). The thermodynamic parameters of irreversible thermal denaturation for the protease enzyme indicate that immobilized enzyme had higher enthalpy (ΔH°), free energy (ΔG°), and entropy (ΔS°) than free one. There was a significant improvement in the maximum reaction velocity (2.5-fold), Michaelis constant (1.9-fold), and catalytic efficiency (4.7-fold) values after immobilization indicating the efficiency and effectiveness of immobilization approach.
314菌株能够利用农业和工业废料生产金属蛋白酶。分别发现橙皮和麦麸是最合适的碳源和氮源。优化后的生产工艺使酶产量提高了5.1倍。使用了基于云母的不同粒径的玻璃和玻璃陶瓷作为无机载体。蛋白酶通过共价键合和物理吸附方法固定在纳米颗粒载体上。物理吸附在玻璃陶瓷(粒径0.71 - 1.0毫米)上的酶具有最高的残余活性和最高的固定化产率。通过X射线衍射(XRD)和扫描电子显微镜(SEM)对玻璃陶瓷进行了表征。固定化酶在60°C时的活化能( )和失活速率常数( )分别比游离酶低约1.29倍和1.46倍。此外,吸附酶具有更高的变性能( )、半衰期( )和D值。蛋白酶不可逆热变性的热力学参数表明,固定化酶比游离酶具有更高的焓(ΔH°)、自由能(ΔG°)和熵(ΔS°)。固定化后最大反应速度 (提高了2.5倍)、米氏常数 (提高了1.9倍)和催化效率 (提高了4.7倍)的值有显著提高,表明固定化方法的效率和有效性。