North Sydney Orthopaedic and Sports Medicine Centre, Sydney, Australia.
Castlereagh Imaging, Sydney, Australia.
Am J Sports Med. 2019 Aug;47(10):2386-2393. doi: 10.1177/0363546519861530. Epub 2019 Jul 15.
Graft fixation with interference screws for anterior cruciate ligament (ACL) reconstruction is a highly successful technique. Polyether ether ketone (PEEK) is a novel thermoplastic polymer with high biocompatibility and mechanical properties that mimic native bone, and it can be imaged on computed tomography or magnetic resonance imaging (MRI) without signal flare.
To compare the clinical performance of ACL reconstruction with PEEK and titanium interference screws at 2 years and to evaluate a novel method of measuring tunnel volume.
Randomized controlled trial; Level of evidence, 1.
A total of 133 patients underwent arthroscopic ACL reconstruction with 4-strand hamstring autografts and were randomized to have titanium or PEEK interference screws for femoral and tibial tunnel fixation. At 2 years, subjective Lysholm and International Knee Documentation Committee scores were assessed and clinical examination performed. At 12 months, MRI was performed to assess graft incorporation and cyst formation, and a novel technique was employed to measure tunnel volumes.
There were no significant differences in graft rerupture rate, contralateral ACL rupture rate, subjective outcomes, or objective outcomes. In the titanium and PEEK groups, MRI demonstrated high overall rates of graft integration (96%-100% and 90%-93%, respectively) and ligamentization (89% and 84%) and low rates of synovitis (22% and 10%) and cyst formation (0%-18% and 13%-15%). There was a higher proportion of patients with incomplete graft integration within the femoral tunnel in the PEEK group as compared with the titanium group (10% vs 0%, = .03); however, the authors suggest that metal artifact precluded proper assessment of the graft in the titanium group by MRI. Tunnel volumes also appeared to be equivalent in the 2 groups and were measured with a novel technique that was highly reproducible in the PEEK group secondary to the absence of flare.
Two-year clinical analysis of PEEK interference screws for femoral and tibial fixation of ACL reconstructions showed equivalent clinical performance to titanium interference screws. Given the excellent mechanical characteristics, biological compatibility, and absence of metal artifact on MRI, PEEK has become our material of choice for interference screw fixation in ACL reconstruction.
用于前交叉韧带(ACL)重建的移植物固定用干扰螺钉是一种非常成功的技术。聚醚醚酮(PEEK)是一种新型热塑性聚合物,具有较高的生物相容性和机械性能,可模仿天然骨,并且可以在计算机断层扫描或磁共振成像(MRI)上成像而不会产生信号闪烁。
比较 ACL 重建中使用 PEEK 和钛制干扰螺钉 2 年的临床效果,并评估一种新的隧道容积测量方法。
随机对照试验;证据水平,1 级。
共 133 例患者接受关节镜下 ACL 重建,使用 4 股腘绳肌腱自体移植物,随机使用钛制或 PEEK 干扰螺钉进行股骨和胫骨隧道固定。2 年时,评估主观 Lysholm 和国际膝关节文献委员会评分,并进行临床检查。在 12 个月时,进行 MRI 评估以评估移植物整合和囊肿形成,并采用一种新的技术来测量隧道容积。
在移植物再断裂率、对侧 ACL 断裂率、主观结果或客观结果方面,两组均无显著差异。在钛组和 PEEK 组中,MRI 显示总体上移植物整合率(分别为 96%-100%和 90%-93%)和韧带化率(分别为 89%和 84%)较高,滑膜炎率(分别为 22%和 10%)和囊肿形成率(分别为 0%-18%和 13%-15%)较低。与钛组相比,PEEK 组股骨隧道内的移植物完全整合的患者比例更高(10%比 0%, =.03);然而,作者认为,MRI 中的金属伪影妨碍了对钛组移植物的正确评估。隧道容积在两组中似乎也相当,并且使用一种新的技术进行了测量,由于不存在信号闪烁,该技术在 PEEK 组中的重复性很高。
对 ACL 重建中股骨和胫骨固定用 PEEK 干扰螺钉进行的 2 年临床分析显示,其临床效果与钛制干扰螺钉相当。鉴于其出色的机械特性、生物相容性以及在 MRI 上无金属伪影,PEEK 已成为我们在 ACL 重建中固定干扰螺钉的首选材料。