Recovery of Gram-Negative Bacteria from Aerobic Blood Culture Bottles Containing Antibiotic Binding Resins after Exposure to β-Lactam and Fluoroquinolone Concentrations.

Blood culture bottles containing antibiotic binding resins are routinely used to minimize artificial sterilization in the presence of antibiotics. However, the resin binding kinetics can differ between antibiotics and concentrations. This study assessed the impact of clinically meaningful peak, midpoint, and trough concentrations of meropenem, imipenem, cefepime, cefazolin, levofloxacin, and piperacillin-tazobactam on the recovery of , , and from resin-containing BacT/Alert FA Plus and Bactec Aerobic/F blood culture bottles. -inoculated bottles alarmed positive in 4/20 (20%), 16/20 (80%), and 20/20 (100%) of those with peak, midpoint, and trough concentrations of antipseudomonal agents, respectively ( ≤ 0.001). was recovered from 8/24 (33%), 11/24 (46%), and 14/24 (58%) of bottles with peak, midpoint, and trough concentrations, respectively ( = 0.221). was recovered from 8/16 (50%) at all concentrations of the studied antibiotics ( = 1.0). BacT/Alert and Bactec bottles inoculated with antibiotics and had similar times to detection (TTD) ( = 0.352); however, antibiotic-containing BacT/Alert bottles had a shorter TTD compared with antibiotic-containing Bactec bottles for ( = 0.026) and ( ≤ 0.001). Pathogen recovery in BacT/Alert FA Plus and Bactec Aerobic/F blood culture bottles containing antibiotic binding resins was greatly reduced in the presence of antibiotics, especially at higher concentrations. These data support the practice of drawing blood cultures immediately before an antibiotic dose to maximize the chances of pathogen recovery.