Department of Biology, Faculty of Science and Mathematics, Universiti Pendidikan Sultan Idris, 35900, Tanjung Malim, Perak, Malaysia.
School of Environmental and Natural Resource Sciences, Faculty of Science and Technology, Universiti Kebangsaan Malaysia, 43600, Bangi, Selangor, Malaysia.
Arch Environ Contam Toxicol. 2019 Nov;77(4):587-593. doi: 10.1007/s00244-019-00656-3. Epub 2019 Jul 29.
Anionic surfactants are one of the pollutants derived from particulate matter (PM) and adversely affect the health of living organisms. In this study, the compositions of surfactants extracted from PM and vehicle soot collected in an urban area were investigated. A high-volume air sampler was used to collect PM sample at urban area based on coarse (> 1.5 µm) and fine (< 1.5 µm) mode particles. Meanwhile, the vehicle soot was collected randomly from the exhaust pipe of various types of diesel and petrol vehicles using a soft brush during dry days. The concentration of anionic surfactants, such as Methylene Blue Active Substances (MBAS), was determined by the colorimetric method using UV-Vis Spectrophotometer. Morphological properties of the PM and exhaust soot sample was studied using field-emission scanning electron microscope. Results revealed that the MBAS concentration was dominated by fine mode particles (6.03 ± 3.97 µmol g), whereas heavy-duty vehicles, such as buses, demonstrated the highest surfactant concentration with an average value of 0.340 ± 0.180 µmol g. The structure of collected PM for all samples mostly appeared to be an irregular shape with the size range of ultrafine particles (0.05-0.2 µm). The emission of surfactants from diesel and petrol vehicles, especially at urban areas, should be a major concern, because they could negatively affect human health and the environment.
阴离子表面活性剂是颗粒物(PM)衍生的污染物之一,对生物体的健康有不利影响。本研究调查了从城市地区收集的 PM 和车辆烟尘中提取的表面活性剂的组成。采用大容量空气采样器,根据粗颗粒(>1.5μm)和细颗粒(<1.5μm)模式颗粒,在城市地区采集 PM 样品。同时,在干燥天气下,使用软刷从各种类型的柴油和汽油车辆的排气管中随机收集车辆烟尘。采用分光光度计比色法测定阴离子表面活性剂(如亚甲蓝活性物质(MBAS))的浓度。采用场发射扫描电子显微镜研究 PM 和排气烟尘样品的形态特性。结果表明,MBAS 浓度主要由细颗粒(6.03±3.97µmol g)控制,而公交车等重型车辆的表面活性剂浓度最高,平均值为 0.340±0.180µmol g。所有样品的采集 PM 结构大多呈不规则形状,粒径范围为超细颗粒(0.05-0.2µm)。柴油和汽油车辆,特别是在城市地区,表面活性剂的排放应引起高度关注,因为它们可能会对人类健康和环境造成不利影响。