Suppr超能文献

可重构 MRI 线圈技术可显著降低深部脑刺激植入物的射频加热:1.5T 下双侧 DBS 导联射频加热降低的首次体外研究。

Reconfigurable MRI coil technology can substantially reduce RF heating of deep brain stimulation implants: First in-vitro study of RF heating reduction in bilateral DBS leads at 1.5 T.

机构信息

Department of Biomedical Engineering, McCormick School of Engineering, Northwestern University, Evanston, IL, United States of America.

Department of Radiology, Feinberg School of Medicine, Northwestern University, Chicago, IL, United States of America.

出版信息

PLoS One. 2019 Aug 7;14(8):e0220043. doi: 10.1371/journal.pone.0220043. eCollection 2019.

Abstract

Patients with deep brain stimulation (DBS) implants can significantly benefit from magnetic resonance imaging (MRI), however access to MRI is restricted in these patients because of safety concerns due to RF heating of the leads. Recently we introduced a patient-adjustable reconfigurable transmit coil for low-SAR imaging of DBS at 1.5T. A previous simulation study demonstrated a substantial reduction in the local SAR around single DBS leads in 9 unilateral lead models. This work reports the first experimental results of temperature measurement at the tips of bilateral DBS leads with realistic trajectories extracted from postoperative CT images of 10 patients (20 leads in total). A total of 200 measurements were performed to record temperature rise at the tips of the leads during 2 minutes of scanning with the coil rotated to cover all accessible rotation angles. In all patients, we were able to find an optimum coil rotation angle and reduced the heating of both left and right leads to a level below the heating produced by the body coil. An average heat reduction of 65% was achieved for bilateral leads. When considering each lead alone, an average heat reduction of 80% was achieved. Our results suggest that reconfigurable coil technology introduces a promising approach for imaging of patients with DBS implants.

摘要

植入深部脑刺激(DBS)装置的患者可以从磁共振成像(MRI)中显著获益,但由于担心射频加热导线,这些患者接受 MRI 的机会受到限制。最近,我们引入了一种可由患者调节的可重构发射线圈,用于在 1.5T 下对 DBS 进行低 SAR 成像。先前的模拟研究表明,在 9 个单侧导联模型中,单个 DBS 导联周围的局部 SAR 显著降低。本研究报告了首次在 10 名患者(共 20 个导联)的术后 CT 图像中提取的双侧 DBS 导联尖端的温度测量的实验结果。总共进行了 200 次测量,以记录在旋转线圈以覆盖所有可及的旋转角度 2 分钟扫描期间导联尖端的温升。在所有患者中,我们都能够找到最佳的线圈旋转角度,并将左右导联的加热降低到低于体线圈产生的加热水平。双侧导联的平均热减少 65%。单独考虑每个导联时,平均热减少 80%。我们的研究结果表明,可重构线圈技术为 DBS 植入患者的成像提供了一种很有前途的方法。

https://cdn.ncbi.nlm.nih.gov/pmc/blobs/962c/6685612/d76a6869a676/pone.0220043.g001.jpg

文献AI研究员

20分钟写一篇综述,助力文献阅读效率提升50倍。

立即体验

用中文搜PubMed

大模型驱动的PubMed中文搜索引擎

马上搜索

文档翻译

学术文献翻译模型,支持多种主流文档格式。

立即体验