Kim Minsu, Nabeya Shunichi, Nandi Dip K, Suzuki Kazuharu, Kim Hyun-Mi, Cho Seong-Yong, Kim Ki-Bum, Kim Soo-Hyun
Department of Materials Science and Engineering and Research Institute of Advanced Materials (RIAM), Seoul National University, Gwanak-gu, Seoul 08826, Korea.
School of Materials Science and Engineering, Yeungnam University, Gyeongsan, Gyeongbuk 38541, Korea.
ACS Omega. 2019 Jun 25;4(6):11126-11134. doi: 10.1021/acsomega.9b01003. eCollection 2019 Jun 30.
Atomic layer deposition (ALD) of Ni was demonstrated by introducing a novel oxygen-free heteroleptic Ni precursor, (η-cyclohexenyl)(η-cyclopentadienyl)nickel(II) [Ni(Chex)(Cp)]. For this process, non-oxygen-containing reactants (NH and H molecules) were used within a deposition temperature range of 320-340 °C. Typical ALD growth behavior was confirmed at 340 °C with a self-limiting growth rate of 1.1 Å/cycle. Furthermore, a postannealing process was carried out in a H ambient environment to improve the quality of the as-deposited Ni film. As a result, a high-quality Ni film with a substantially low resistivity (44.9 μΩcm) was obtained, owing to the high purity and excellent crystallinity. Finally, this Ni ALD process was also performed on a graphene surface. Selective deposition of Ni on defects of graphene was confirmed by transmission electron microscopy and atomic force microscopy analyses with a low growth rate (∼0.27 Å/cycle). This unique method can be further used to fabricate two-dimensional functional materials for several potential applications.
通过引入一种新型的无氧杂配镍前驱体(η-环己烯基)(η-环戊二烯基)镍(II)[Ni(Chex)(Cp)],实现了镍的原子层沉积(ALD)。对于该工艺,在320 - 340°C的沉积温度范围内使用了不含氧的反应物(NH和H分子)。在340°C时确认了典型的ALD生长行为,其自限生长速率为1.1 Å/循环。此外,在氢气环境中进行了后退火工艺,以提高沉积态镍膜的质量。结果,由于高纯度和优异的结晶度,获得了具有极低电阻率(44.9 μΩcm)的高质量镍膜。最后,该镍ALD工艺也在石墨烯表面进行。通过透射电子显微镜和原子力显微镜分析证实了镍在石墨烯缺陷上的选择性沉积,其生长速率较低(约0.27 Å/循环)。这种独特的方法可进一步用于制造用于多种潜在应用的二维功能材料。