Torque efficiency of a customized lingual appliance : Performance of wires with three different ligature systems.

PURPOSE

Torque control in lingual orthodontics is key to obtain optimal esthetic results. The aim of this in vitro experimental study was to verify the efficiency of the ligature-archwire-slot system in torque control using a customized lingual appliance.

METHODS

An idealized cast with eight extracted human teeth was created and a set of customized lingual brackets was obtained. Tests were performed with the following wires: 0.016″ × 0.022″ nickel-titanium (NiTi), 0.016″ × 0.024″ stainless steel (SS), 0.017″ × 0.025″ βIII titanium (βIIITi), 0.0182″ × 0.0182″ βIIITi, 0.018″ × 0.025″ SS, 0.018″ × 0.025″ NiTi, 0.018″ × 0.025″ βIIITi, and three types of ligatures were tested using a universal testing machine to calculate the efficiency in torque control. A blind statistical analysis was performed.

RESULTS

Based on post hoc multiple comparisons, differences were found for two of the three ligatures when using the 0.016″ × 0.022″ NiTi wires (p < 0.001 for both ligatures). When considering all ligatures, 0.018″ × 0.025″ SS and 0.018″ × 0.025″ βIIITi were significantly different from all other wires (p < 0.001 in all cases). With a moment of 5 Nmm, the 0.016″ × 0.022″ NiTi wire developed median angles of 26.7, 29.8, and 38.7° with the three ligatures, respectively, while the 0.018″ × 0.025″ SS developed median angles of 12.9, 10.7, and 12.7°, respectively.

CONCLUSIONS

The ligature type and geometry did not affect the efficiency of torque control, except for the 0.016″ × 0.022″ NiTi wire. The wires generating the greatest moments were the 0.018″ × 0.025″ SS and 0.018″ × 0.025″ βIIITi.