Unit of Chemical-physics Fundamentals in Chemical Engineering, Department of Engineering, University Campus Bio-Medico di Roma, via Álvaro del Portillo 21, 00128 Rome, Italy.
Unit of Process Engineering, Department of Engineering, University Campus Bio-Medico di Roma, via Álvaro del Portillo 21, 00128 Rome, Italy.
Med Eng Phys. 2019 Dec;74:106-114. doi: 10.1016/j.medengphy.2019.09.015. Epub 2019 Sep 26.
This work focuses on a new mathematical model which describes the gastro-intestinal absorption of drugs and the effect of food interactions on drugs bioavailability. The model structure consists of five compartments (stomach, duodenum, jejunum feeding, intestine and blood) simulated though different in-series reactors. All the enzymatic reactions taking place in the gastro-intestinal system are described through the Michaelis-Menten kinetic equations. The model has been tested for drug administration (paracetamol and ketoprofen) with and without the meal digestion. The model has been validated through pharmacokinetics curves obtained from in vivo tests (reported in the literature) and used to simulate the drug absorption dynamics in different conditions. The maximum blood concentration were 0.153 mmol L and 0.0243 mmol L, respectively for paracetamol and ketoprofen. The time to reach the maximum concentration for the paracetamol and ketoprofen was around 55 min. In case of contemporary meal digestion, the maximum concentration of paracetamol in the blood was 0.100 mmol L and 0.0135 mmol L for ketoprofen; the time to reach the maximum concentration was 3 h and 45 min for paracetamol and 3 h and 35 min for ketoprofen. The drugs showed different pharmacokinetics, in agreement with the literature, during the digestion of food. To show the predictive capacity of the model, the simulations were also compared against additional experimental data (obtained from in vivo tests available in the literature) relative to ketoprofen administration with food.
这项工作专注于一个新的数学模型,该模型描述了药物的胃肠吸收以及食物相互作用对药物生物利用度的影响。该模型结构由五个隔室(胃、十二指肠、空肠喂养、肠和血液)组成,通过不同的串联反应器进行模拟。胃肠系统中发生的所有酶促反应都通过米氏-门捷列夫动力学方程来描述。该模型已经过药物给药(扑热息痛和酮洛芬)和不进食消化的测试。该模型通过体内试验(文献报道)获得的药代动力学曲线进行了验证,并用于模拟不同条件下的药物吸收动力学。扑热息痛和酮洛芬的最大血药浓度分别为 0.153mmol/L 和 0.0243mmol/L。扑热息痛和酮洛芬达到最大浓度的时间约为 55 分钟。在同时进食消化的情况下,扑热息痛和酮洛芬在血液中的最大浓度分别为 0.100mmol/L 和 0.0135mmol/L;达到最大浓度的时间分别为 3 小时和 45 分钟,酮洛芬为 3 小时和 35 分钟。药物在消化食物期间表现出不同的药代动力学特性,与文献一致。为了展示模型的预测能力,还将模拟结果与有关酮洛芬进食时的其他实验数据(从文献中的体内试验获得)进行了比较。