Department of Kinesiology, University of Waterloo , Waterloo , Canada.
Ergonomics. 2019 Dec;62(12):1515-1523. doi: 10.1080/00140139.2019.1674931. Epub 2019 Oct 22.
Recently, the rate at which sit-to-stand workstations are being introduced into the workplace has seen a dramatic increase. Aside from adjusting the height of the desk when transitioning from sitting to standing, there is a lack of literature regarding the necessary adjustments to other equipment associated with the workstation. To better understand some of these limitations, 16 participants stood and sat at a sit-to-stand workstation while adhering to current Canadian Standards Association (CSA) Guidelines for Office Ergonomics. Transitioning between sitting and standing while adhering to CSA guidelines resulted in a 3.9 cm difference in monitor height relative to work surface between sitting and standing. Results from this investigation support the notion that monitor height adjustments relative to the work surface are necessary when utilising sit-to-stand workstations - with the implementation to practice message being that both sitting and standing configurations need to be assessed and accommodated in the workstation configuration. Limited guidelines exist in the necessary adjustments to equipment associated with sit-to-stand workstations. Transitioning between sitting and standing resulted in a 3.9 cm difference in monitor height relative to work surface between sitting and standing. This supports that monitor height adjustments relative to the workstation are necessary when using sit-to-stand workstations.
最近，可调节高度的工作站在工作场所中的引入率显著增加。除了在从坐姿转换到站姿时调整桌子的高度外，对于与工作站相关的其他设备的必要调整，文献中还缺乏相关内容。为了更好地理解其中的一些限制因素，16 名参与者在符合加拿大标准协会（CSA）办公人体工程学准则的可调节高度工作站上进行了坐姿和站姿操作。在遵守 CSA 准则的情况下，从坐姿转换到站姿时，显示器相对于工作面的高度会相差 3.9 厘米。本研究的结果支持了这样一种观点，即当使用可调节高度工作站时，需要根据工作面来调整显示器的高度——这一实施实践信息表明，需要对坐姿和站姿配置进行评估并在工作站配置中进行调整。目前，与可调节高度工作站相关的设备的必要调整方面的指南有限。从坐姿转换到站姿时，显示器相对于工作面的高度会相差 3.9 厘米。这表明，在使用可调节高度工作站时，需要根据工作站来调整显示器的高度。
