Electrical Engineering, National Taiwan University.
Stein Eye Institute, University of California, Los Angeles, USA.
J Cataract Refract Surg. 2019 Nov;45(11):1665-1669. doi: 10.1016/j.jcrs.2019.06.020.
To evaluate semiautomated surgical lens extraction procedures using the optical coherence tomography (OCT)-integrated Intraocular Robotic Interventional Surgical System.
Stein Eye Institute and Department of Mechanical and Aerospace Engineering, University of California, Los Angeles, USA.
Experimental study.
Semiautomated lens extraction was performed on postmortem pig eyes using a robotic platform integrated with an OCT imaging system. Lens extraction was performed using a series of automated steps including robot-to-eye alignment, irrigation/aspiration (I/A) handpiece insertion, anatomic modeling, surgical path planning, and I/A handpiece navigation. Intraoperative surgical supervision and human intervention were enabled by real-time OCT image feedback to the surgeon via a graphical user interface. Manual preparation of the pig-eye models, including the corneal incision and capsulorhexis, was performed by a trained cataract surgeon before the semiautomated lens extraction procedures. A scoring system was used to assess surgical complications in a postoperative evaluation.
Complete lens extraction was achieved in 25 of 30 eyes. In the remaining 5 eyes, small lens pieces (≤1.0 mm) were detected near the lens equator, where transpupillary OCT could not image. No posterior capsule rupture or corneal leakage occurred. The mean surgical duration was 277 seconds ± 42 (SD). Based on a 3-point scale (0 = no damage), damage to the iris was 0.33 ± 0.20, damage to the cornea was 1.47 ± 0.20 (due to tissue dehydration), and stress at the incision was 0.97 ± 0.11.
No posterior capsule rupture was reported. Complete lens removal was achieved in 25 trials without significant surgical complications. Refinements to the procedures are required before fully automated lens extraction can be realized.
评估使用集成光学相干断层扫描(OCT)的眼内机器人介入式手术系统进行半自动手术晶状体提取的程序。
美国加利福尼亚大学洛杉矶分校斯坦眼科研究所和机械与航空航天工程系。
实验研究。
使用集成 OCT 成像系统的机器人平台对猪眼进行半自动化晶状体提取。晶状体提取通过一系列自动化步骤进行,包括机器人与眼睛的对准、冲洗/抽吸(I/A)手持件插入、解剖建模、手术路径规划和 I/A 手持件导航。通过图形用户界面向外科医生实时反馈 OCT 图像,实现术中手术监督和人工干预。由一名受过培训的白内障外科医生手动准备猪眼模型,包括角膜切口和囊膜切开术,然后进行半自动晶状体提取程序。在术后评估中使用评分系统评估手术并发症。
在 30 只眼中,有 25 只完全提取了晶状体。在其余的 5 只眼中,在瞳孔 OCT 无法成像的晶状体赤道附近发现了小块晶状体(≤1.0mm)。没有发生后囊破裂或角膜渗漏。平均手术时间为 277 秒±42(SD)。基于 3 分制(0=无损伤),虹膜损伤为 0.33±0.20,角膜损伤为 1.47±0.20(由于组织脱水),切口处的压力为 0.97±0.11。
没有报告后囊破裂。在 25 次试验中实现了完全晶状体去除,没有明显的手术并发症。在实现全自动晶状体提取之前,需要对程序进行改进。