IEEE Trans Ultrason Ferroelectr Freq Control. 2020 Apr;67(4):703-714. doi: 10.1109/TUFFC.2019.2952797. Epub 2019 Nov 11.
Abdominal imaging suffers from a particularly difficult acoustic environment-targets are located deep and overlying tissue layers with varying properties generate acoustic clutter. Increasing array size can overcome the penetration and lateral resolution problems in ideal conditions, but how the impact of clutter scales with increasing array extent is unknown and may limit the benefits in vivo. Previous ex vivo experimental work showed the promise of large arrays but was technically limited to a length of 6.4 cm and to only partial sampling of the array elements. We present an extension of those studies using the Fullwave simulation tool to create a 10 cm ×2 cm matrix array with full lateral element sampling. We used a numerical model of the abdomen based on the maps of tissue acoustical properties and found that propagation through the modeled abdominal layers generated on average 25.4 ns of aberration and 0.74 cm of reverberation clutter across the array extent. Growing the full aperture from 2 to 10 cm improved contrast by 8.6 dB and contrast-to-noise ratio by 22.9% in addition to significantly improving target resolution. Alternative array strategies that may be useful for implementation-mismatched aperture sizes or a swept synthetic aperture-also produced improved quality with growing aperture size. These results motivate the development of larger diagnostic imaging arrays for the purpose of high-resolution imaging in challenging environments.
腹部成像受到特别困难的声学环境的影响——目标位于深度和具有不同特性的覆盖组织层,会产生杂波。在理想条件下,增加阵列尺寸可以克服穿透和横向分辨率的问题,但杂波的影响如何随阵列范围的增加而变化尚不清楚,这可能会限制其在体内的应用。先前的离体实验工作表明了大阵列的潜力,但在技术上仅限于 6.4 厘米的长度,并且仅对阵列元件的部分进行采样。我们使用 Fullwave 模拟工具扩展了这些研究,创建了一个 10 厘米×2 厘米的矩阵阵列,实现了完全的横向元件采样。我们使用基于组织声学特性图的腹部数值模型,发现通过模拟腹部层的传播,在阵列范围内平均产生了 25.4 纳秒的像差和 0.74 厘米的混响杂波。与 2 厘米相比,全孔径从 2 厘米扩展到 10 厘米可提高 8.6dB 的对比度和 22.9%的对比度噪声比,同时还显著提高了目标分辨率。替代的阵列策略,如不匹配孔径尺寸或扫频合成孔径,也随着孔径尺寸的增大而提高了质量。这些结果为在具有挑战性的环境中实现高分辨率成像的目的,推动了更大诊断成像阵列的发展。