Suppr超能文献

小关节面偏歪与颈椎间盘突出症的关系。

The relationship between facet tropism and cervical disc herniation.

机构信息

National Key Discipline of Human Anatomy, School of Basic Medical Sciences, Southern Medical University, Guangzhou, China.

Guangdong Engineering Research Center for Translation of Medical 3D Printing Application, Guangzhou, China.

出版信息

J Anat. 2020 May;236(5):916-922. doi: 10.1111/joa.13151. Epub 2020 Jan 21.

Abstract

Many studies have demonstrated the association between facet tropism and disc herniation in the lumbar spine. Some of them found that lumbar disc herniation was on the side of the more sagittal facet joint interface. However, little is understood about the association of facet tropism with disc herniation in the cervical spine. As the relationship between the facet orientation and the side of cervical disc herniation (CDH) is unclear, the purpose of this study is to investigate that relationship. Ninety-six patients with single-level CDH (C4-C5, C5-C6 or C6-C7) were included in the CDH group of this study. Another 50 age-matched and gender-matched healthy participants who accepted physical examinations were enrolled as the control group. The cervical facet angles of two sides were measured using axial computed tomography (CT). The intersection angle of the midsagittal line of the vertebra to the facet line represents the facet angle. Facet tropism was defined as the angular difference of 7º between the left and the right sides. Facet tropism angle was recorded as the absolute value of the difference of facet angles between two sides. There were 20 herniations at C4-C5 level, 50 herniations at C5-C6 level and 26 herniations at C6-C7 level. The present study showed that more cases in the CDH group had facet tropism than did those in the control group at C4-C5, C5-C6 and C6-C7 level (p = .021, p = .001, p = .015, respectively). The facet tropism angles in the CDH group were significantly bigger than those in the control group at C4-C5, C5-C6 and C6-C7 level (p = .001, p = .002, p = .028, respectively). In the CDH group, the facet angles on the herniated side were found to be significantly bigger than those on the healthy side at C4-C5, C5-C6 and C6-C7 level (p = .000, p = .000, p = .037, respectively). The findings of this present study suggest that facet tropism is associated with the disc herniation in the cervical spine. We also found that cervical disc herniates towards the side of the bigger facet angle with respect to the sagittal plane. There is a need for future studies to verify the biomechanical impact of facet tropism on CDH.

摘要

许多研究已经证明了腰椎小关节面倾斜与椎间盘突出之间的关系。其中一些研究发现,腰椎间盘突出位于小关节面关节界面更矢状面的一侧。然而,对于颈椎小关节面倾斜与椎间盘突出的关系,人们了解甚少。由于小关节面方向与颈椎间盘突出症(CDH)侧方之间的关系尚不清楚,因此本研究旨在探讨这种关系。本研究纳入了 96 例单节段 CDH(C4-C5、C5-C6 或 C6-C7)患者作为 CDH 组。另 50 例年龄和性别匹配的接受体检的健康参与者被纳入对照组。使用轴位计算机断层扫描(CT)测量两侧颈椎小关节角。代表小关节角的是椎体正中矢状线与小关节线的交点角度。小关节面倾斜定义为左右两侧小关节角度相差 7°。小关节面倾斜角记录为两侧小关节角度之差的绝对值。C4-C5 水平有 20 个椎间盘突出,C5-C6 水平有 50 个椎间盘突出,C6-C7 水平有 26 个椎间盘突出。本研究表明,在 C4-C5、C5-C6 和 C6-C7 水平,CDH 组中更多的病例存在小关节面倾斜,而对照组中则较少(p =.021、p =.001、p =.015)。CDH 组的小关节面倾斜角度在 C4-C5、C5-C6 和 C6-C7 水平显著大于对照组(p =.001、p =.002、p =.028)。在 CDH 组中,在 C4-C5、C5-C6 和 C6-C7 水平,椎间盘突出侧的小关节角度明显大于健侧(p =.000、p =.000、p =.037)。本研究结果表明,小关节面倾斜与颈椎间盘突出症有关。我们还发现,颈椎间盘向矢状面较大的小关节角侧突出。未来需要进一步研究以验证小关节面倾斜对 CDH 的生物力学影响。

相似文献

引用本文的文献

9
[Percutaneous endoscopic Key-Hole technology for treatment of paracentral cervical disc herniation].经皮内镜锁孔技术治疗颈椎间盘突出症
Zhongguo Xiu Fu Chong Jian Wai Ke Za Zhi. 2020 Jul 15;34(7):895-899. doi: 10.7507/1002-1892.202001007.

本文引用的文献

1
The Effect of Axial Torsion on the Mechanical Properties of the Annulus Fibrosus.轴向扭转对纤维环机械性能的影响。
Spine (Phila Pa 1976). 2019 Feb 15;44(4):E195-E201. doi: 10.1097/BRS.0000000000002803.

文献检索

告别复杂PubMed语法,用中文像聊天一样搜索,搜遍4000万医学文献。AI智能推荐,让科研检索更轻松。

立即免费搜索

文件翻译

保留排版,准确专业,支持PDF/Word/PPT等文件格式,支持 12+语言互译。

免费翻译文档

深度研究

AI帮你快速写综述,25分钟生成高质量综述,智能提取关键信息,辅助科研写作。

立即免费体验