García Andres, Castillo Tania, Ramos Diego, Ahumada-Manuel Carlos L, Núñez Cinthia, Galindo Enrique, Büchs Jochen, Peña Carlos
Departamento de Ingeniería Celular y Biocatálisis, Instituto de Biotecnología, UNAM, Universidad Nacional Autónoma de México, Ave. Universidad 2001, Col. Chamilpa, Cuernavaca, 62210, Morelos, México.
Departamento de Microbiología Molecular, Instituto de Biotecnología, UNAM, Universidad Nacional Autónoma de México, Ave. Universidad 2001, Col. Chamilpa, Cuernavaca, 62210, Morelos, México.
Biotechnol Rep (Amst). 2020 Feb 20;26:e00436. doi: 10.1016/j.btre.2020.e00436. eCollection 2020 Jun.
Alginates are polysaccharides that are of interest in various industrial applications. This is due to the viscosifying properties of alginates, which depends on the weight-average molecular weight. The aim of the present study was to evaluate the changes in alginate quality, in terms of the viscosifying power and weight-average molecular weight of the polymer produced by mutant strains in shake flasks under microaerophilic conditions. In cultures developed at oxygen transfer rate (OTR) values close to 5 mmol L h, the highest viscosifying power (1.75 L g) and weight-average molecular weight (3112 ± 150 kDa) were achieved in cultures performed with the AT9 strain. These values were higher than those obtained for the alginates produced by the parental strain ATCC 9046 grown under similar OTR conditions. In contrast, the alginate produced by the GG9 and OPAlgU + exhibited a very low weight-average molecular weight and therefore a poor viscosifying power. Our results have shown that by the cultivation of AT9 strain under microaerophilic conditions it is possible to obtain a polymer having a high weight-average molecular weight and excellent viscosifying capacity. Therefore, it could be a viable strategy for producing alginates for industrial applications.
藻酸盐是在各种工业应用中备受关注的多糖。这归因于藻酸盐的增粘特性,其取决于重均分子量。本研究的目的是评估在微需氧条件下摇瓶中突变菌株产生的聚合物的藻酸盐质量变化,包括增粘能力和重均分子量。在氧气传递速率(OTR)值接近5 mmol L h的培养物中,使用AT9菌株进行的培养物实现了最高的增粘能力(1.75 L g)和重均分子量(3112 ± 150 kDa)。这些值高于在类似OTR条件下生长的亲本菌株ATCC 9046产生的藻酸盐的值。相比之下,GG9和OPAlgU +产生的藻酸盐表现出非常低的重均分子量,因此增粘能力较差。我们的结果表明,通过在微需氧条件下培养AT9菌株,可以获得具有高重均分子量和优异增粘能力的聚合物。因此,这可能是生产用于工业应用的藻酸盐的可行策略。