Xiong Di, Wen Liyang, Peng Shiyuan, Xu Jianchang, Zhang Lijuan
School of Chemical Engineering, Xiangtan University, Xiangtan 411105, China.
Postdoctoral Station of Chemical Engineering and Technology, School of Chemical Engineering, Xiangtan University, Xiangtan 411105, China.
Pharmaceutics. 2020 Mar 12;12(3):258. doi: 10.3390/pharmaceutics12030258.
Good stability and controlled drug release are important properties of polymeric micelles for drug delivery. A good candidate for drug delivery must have outstanding stability in a normal physiological environment, followed with low drug leakage and side effects. Moreover, the chemotherapeutic drug in the micellar core should also be quickly and "on-demand" released in the intracellular microenvironment at the tumor site, which is in favor of overcoming multidrug resistance (MDR) effects of tumor cells. In this work, a mixed micelle was prepared by the simple mix of two amphiphilic copolymers, namely PCL-SS-P(PEGMA--MAEBA) and PCL-SS-PDMAEMA, in aqueous solution. In the mixed micelle's core-shell structure, PCL blocks were used as the hydrophobic core, while the micellar hydrophilic shell consisted of two blocks, namely P(PEGMA--MAEBA) and PDMAEMA. In the micellar shell, PEGMA provided hydrophilicity and stability, while MAEBA introduced the aldehyde sites for reversible crosslinking. Meanwhile, the PDMAEMA blocks were also introduced in the micellar shell for pH-responding protonation and swelling of the micelle. The disulfide bonds between the hydrophobic core and hydrophilic shell had redox sensitive properties. Reversible cross-linked micelles (RCLMs) were obtained by crosslinking the micellar shell with an imine structure. RCLMs showed good stability and excellent ability against extensive dilution by aqueous solution. In addition, the stability in different conditions with various pH values and glutathione (GSH) concentrations was studied. Then, the anticancer drug doxorubicin (DOX) was selected as the model drug to evaluate drug entrapment and release capacity of mixed micelles. The in vitro release profiles indicated that this RCLM had controlled drug release. In the simulated normal physiological environment (pH 7.4), the drug release of the RCLMs was restrained obviously, and the cumulative drug release content was only 25.7 during 72 h. When it came to acidic conditions (pH 5.0), de-crosslinking of the micelles occurred, as well as protonation of PDMAEMA blocks and micellar swelling at the same time, which enhanced the drug release to a large extent (81.4%, 72 h). Moreover, the drug release content was promoted further in the presence of the reductant GSH. In the condition of pH 5.0 with 10 mM GSH, disulfide bonds broke-up between the micelle core and shell, followed by shedding of the shell from the inner core. Then, the micellar disassembly (degradation) happened based on the de-crosslinking and swelling, and the drug release was as high as 95.3%. The MTT assay indicated that the CLSMs showed low cytotoxicity and good biocompatibility against the HepG2 cells. In contrast, the DOX-loaded CLSMs could efficiently restrain the proliferation of tumor cells, and the cell viability after 48 h incubation was just 13.2%, which was close to that of free DOX. This reversible cross-linked mixed micelle with pH/redox responsive behaviors is a potential nanocarrier for chemotherapy.
良好的稳定性和可控的药物释放是用于药物递送的聚合物胶束的重要特性。用于药物递送的理想候选物必须在正常生理环境中具有出色的稳定性,同时具有低药物泄漏和副作用。此外,胶束核心中的化疗药物还应在肿瘤部位的细胞内微环境中快速且“按需”释放,这有利于克服肿瘤细胞的多药耐药(MDR)效应。在本研究中,通过在水溶液中简单混合两种两亲性共聚物,即聚己内酯-二硫键-聚(甲基丙烯酸聚乙二醇酯-甲基丙烯酸乙二胺基乙酯)(PCL-SS-P(PEGMA-MAEBA))和聚己内酯-二硫键-聚甲基丙烯酸二甲氨基乙酯(PCL-SS-PDMAEMA),制备了混合胶束。在混合胶束的核壳结构中,聚己内酯嵌段用作疏水核心,而胶束的亲水外壳由两个嵌段组成,即聚(甲基丙烯酸聚乙二醇酯-甲基丙烯酸乙二胺基乙酯)和聚甲基丙烯酸二甲氨基乙酯。在胶束外壳中,甲基丙烯酸聚乙二醇酯提供亲水性和稳定性,而甲基丙烯酸乙二胺基乙酯引入醛基用于可逆交联。同时,聚甲基丙烯酸二甲氨基乙酯嵌段也引入到胶束外壳中,用于胶束的pH响应质子化和膨胀。疏水核心和亲水外壳之间的二硫键具有氧化还原敏感特性。通过用亚胺结构交联胶束外壳获得可逆交联胶束(RCLMs)。RCLMs表现出良好的稳定性以及优异的抗水溶液大量稀释的能力。此外,研究了其在不同pH值和谷胱甘肽(GSH)浓度条件下的稳定性。然后,选择抗癌药物阿霉素(DOX)作为模型药物来评估混合胶束的载药和释药能力。体外释放曲线表明该RCLM具有可控的药物释放。在模拟的正常生理环境(pH 7.4)中,RCLMs的药物释放明显受到抑制,72小时内累积药物释放量仅为25.7%。在酸性条件(pH 5.0)下,胶束发生去交联,同时聚甲基丙烯酸二甲氨基乙酯嵌段质子化和胶束膨胀,这在很大程度上增强了药物释放(72小时内为81.4%)。此外,在还原剂GSH存在下,药物释放量进一步提高。在pH 5.0和10 mM GSH的条件下,胶束核心与外壳之间的二硫键断裂,随后外壳从内核脱落。然后,基于去交联和膨胀发生胶束解体(降解),药物释放高达95.3%。MTT法表明CLSMs对HepG2细胞显示出低细胞毒性和良好的生物相容性。相比之下,载有DOX的CLSMs能够有效抑制肿瘤细胞的增殖,孵育48小时后的细胞活力仅为13.2%,与游离DOX接近。这种具有pH/氧化还原响应行为的可逆交联混合胶束是一种潜在的化疗纳米载体。