Department of Mineral Resources and Energy Engineering, Jeonbuk National University, Jeonju, Jeonbuk 54896, Republic of Korea.
School of Minerals Processing & Bioengineering, Central South University, Changsha, Hunan, China.
Bioresour Technol. 2020 Jul;307:123181. doi: 10.1016/j.biortech.2020.123181. Epub 2020 Mar 14.
The bioleaching of chalcopyrite concentrate, intensified by the adapted mesophilic culture in the continuous stirred tank reactors (CSTR) was investigated. The cumulative bioleaching efficiency of copper was found to be increased from 34.8% to 49.3% in CSTR-1, 40.3% to 71.2% in CSTR-2, and 44.3% to 73.8% in CSTR-3, while the temperature was elevated from 30 to 37 °C, respectively; whereas, the pulp density (10%, w/v), agitation speed (350 rpm), aeration (400 cc/min), and retention time (7 days across the three reactors) were also optimized to keep constant. Further, the activation energy calculated for copper dissolution under the continuous flow indicated that the surface-diffusion was the overall rate-limiting step for the bioleaching process. Instrumental analysis of solid samples could reveal the degradation pathways of chalcopyrite bioleaching as: CuFeS → CuS → CuFeS → HFeOS. It follows a complex mechanism that includes the occurrence of polysulfide and cooperative mechanism along with the passivation onto mineral surfaces.
采用适应中温的微生物在连续搅拌槽式反应器(CSTR)中强化对黄铜矿精矿的生物浸出。研究发现,在 CSTR-1 中,温度从 30°C 升高到 37°C,铜的累计生物浸出效率从 34.8%提高到 49.3%;在 CSTR-2 中,铜的累计生物浸出效率从 40.3%提高到 71.2%;在 CSTR-3 中,铜的累计生物浸出效率从 44.3%提高到 73.8%;而 pulp density(10%,w/v)、搅拌速度(350rpm)、曝气(400cc/min)和保留时间(三个反应器均为 7 天)也进行了优化以保持恒定。此外,连续流动下铜溶解的活化能计算表明,表面扩散是生物浸出过程的整体速率限制步骤。对固体样品的仪器分析可以揭示黄铜矿生物浸出的降解途径:CuFeS→CuS→CuFeS→HFeOS。它遵循一个复杂的机制,包括多硫化物的发生和协同机制以及矿物表面的钝化。