Munir Akhtar, Ul Haq Tanveer, Hussain Iqtidar, Ullah Irfan, Hussain Syed Zajif, Qurashi Ahsanulhaq, Iqbal Javed, Rehman Asma, Hussain Irshad
Department of Chemistry & Chemical Engineering, SBA School of Science & Engineering, Lahore University of Management Sciences (LUMS), DHA, Lahore, 54792, Pakistan.
Department of Chemistry, Khalifa University (KU), Main Campus, Abu Dhabi, 127788, United Arab Emirates.
Chemistry. 2020 Sep 1;26(49):11209-11219. doi: 10.1002/chem.202000491. Epub 2020 Jul 28.
The use of water splitting modules is highly desired for the sustainable production of H as a future energy carrier. However, the sluggish kinetics and demand of high anodic potential are the bottlenecks for half-the cell oxygen evolution reaction (OER), which severely hamper the overall conversion efficiency. Although transition metal oxides based electrocatalysts have been envisioned as cost-effective and potential contenders for this quest, nevertheless, their low conductivity, instability, and limited number of active sites are among the common impediments that need to be addressed to eventually enhance their inherent catalytic potential for enhanced OER activity. Herein, the controlled assembly of transition metal oxides, that is, Cu@CuO nanoclusters (NCs, ≈2 nm) and Co@CoO beaded nanoclusters (BNCs, ≈2 nm), on thiol-functionalized graphene oxide (G-SH) nanosheets is reported to form novel and highly efficient electrocatalysts for OER. The thiol (-SH) functionality was incorporated by selective epoxidation on the surface of graphene oxide (GO) to achieve chemically exfoliated nanosheets to enhance its conductivity and trapping ability for metal oxides in nanoscale dimensions (≈2 nm). During the electrocatalytic reaction, overpotentials of 290 mV and 310 mV are required to achieve a current density of 10 mA cm for BNCs and NCs, respectively, and the catalysts exhibit tremendous long-term stability (≈50 h) in purified alkaline medium (1 m KOH) with no dissolution in the electrolyte. Moreover, the smaller Tafel slopes (54 mV/dec for BNCs and 66 mV/dec for NCs), and a Faradic efficiency of approximately 96 % indicate not only the selectivity but also the tailored heterogeneous electrons transfer (HET) rate, which is required for fast electrode kinetics. It is anticipated that such ultrasmall metal oxide nanoclusters and their controlled assembly on a conducting surface (G-SH) may offer high electrochemical accessibility and a plethora of active sites owing to the drastic decrease in dimensions and thus can synergistically ameliorate the challenging OER process.
为了可持续生产作为未来能源载体的氢气,人们非常希望使用水分解模块。然而,缓慢的动力学和对高阳极电位的需求是半电池析氧反应(OER)的瓶颈,这严重阻碍了整体转换效率。尽管基于过渡金属氧化物的电催化剂被认为是实现这一目标的具有成本效益的潜在竞争者,然而,它们的低导电性、不稳定性以及有限数量的活性位点是需要解决的常见障碍,以最终提高其固有的催化潜力,增强OER活性。在此,报道了过渡金属氧化物,即Cu@CuO纳米团簇(NCs,≈2 nm)和Co@CoO串珠状纳米团簇(BNCs,≈2 nm),在硫醇功能化氧化石墨烯(G-SH)纳米片上的可控组装,以形成用于OER的新型高效电催化剂。通过在氧化石墨烯(GO)表面进行选择性环氧化引入硫醇(-SH)官能团,以实现化学剥离的纳米片,从而提高其导电性和在纳米尺度(≈2 nm)对金属氧化物的捕获能力。在电催化反应过程中,BNCs和NCs分别需要290 mV和310 mV的过电位才能达到10 mA cm的电流密度,并且催化剂在纯化的碱性介质(1 m KOH)中表现出极大的长期稳定性(≈50 h),在电解质中不溶解。此外,较小的塔菲尔斜率(BNCs为54 mV/dec,NCs为66 mV/dec)以及约96 %的法拉第效率不仅表明了选择性,还表明了定制的异质电子转移(HET)速率,这是快速电极动力学所必需的。预计这种超小金属氧化物纳米团簇及其在导电表面(G-SH)上的可控组装,由于尺寸的急剧减小,可能提供高电化学可及性和大量活性位点,从而可以协同改善具有挑战性的OER过程。