Ramlal Vishwakarma Ravikumar, Patel Kinjal B, Raj Savan K, Srivastava Divesh N, Mandal Amal Kumar
Analytical and Environmental Science Division and Centralized Instrument Facility, CSIR-Central Salt and Marine Chemicals Research Institute, G. B. Marg, Bhavnagar 364002, Gujarat, India.
Academy of Scientific and Innovative Research (AcSIR), Ghaziabad 201002, India.
ACS Appl Mater Interfaces. 2024 May 22;16(20):26034-26043. doi: 10.1021/acsami.4c00609. Epub 2024 May 9.
Electrocatalytic water splitting provides a sustainable method for storing intermittent energies, such as solar energy and wind, in the form of hydrogen fuel. However, the oxygen evolution reaction (OER), constituting the other half-cell reaction, is often considered the bottleneck in overall water splitting due to its slow kinetics. Therefore, it is crucial to develop efficient, cost-effective, and robust OER catalysts to enhance the water-splitting process. Transition-metal-based coordination polymers (CPs) serve as promising electrocatalysts due to their diverse chemical architectures paired with redox-active metal centers. Despite their potential, the rational use of CPs has faced obstacles including a lack of insights into their catalytic mechanisms, low conductivity, and morphology issues. Consequently, achieving success in this field requires the rational design of ligands and topological networks with the desired electronic structure. This study delves into the design and synthesis of three novel conjugated coordination polymers (CCPs) by leveraging the full conjugation of terpyridine-attached flexible tetraphenylethylene units as electron-rich linkers with various redox-active metal centers [Co(II), Ni(II), and Zn(II)]. The self-assembly process is tuned for each CCP, resulting in two distinct morphologies: nanosheets and nanorings. The electrocatalytic OER performance efficiency is then correlated with factors such as the nanostructure morphology and redox-active metal centers in alkaline electrolytes. Notably, among the three morphologies studied, nanorings for each CCP exhibit a superior OER activity. Co(II)-integrated CCPs demonstrate a higher activity between the redox-active metal centers. Specifically, the Co(II) nanoring morphology displays exceptional catalytic activity for OER, with a lower overpotential of 347 mV at a current density of 10 mA cm and small Tafel slopes of 115 mV dec. The long-term durability is demonstrated for at least 24 h at 1.57 V vs RHE during water splitting. This is presumably the first proof that links the importance of nanostructure morphologies to redox-active metal centers in improving the OER activity, and it may have implications for other transdisciplinary energy-related applications.
电催化水分解提供了一种可持续的方法,可将太阳能和风能等间歇性能量以氢燃料的形式储存起来。然而,构成另一半电池反应的析氧反应(OER),由于其动力学缓慢,常被认为是整个水分解过程中的瓶颈。因此,开发高效、经济高效且坚固的OER催化剂对于增强水分解过程至关重要。基于过渡金属的配位聚合物(CPs)由于其多样的化学结构与氧化还原活性金属中心相结合,是很有前景的电催化剂。尽管它们具有潜力,但CPs的合理应用面临着诸多障碍,包括对其催化机制缺乏深入了解、导电性低以及形态问题。因此,在该领域取得成功需要合理设计具有所需电子结构的配体和拓扑网络。本研究通过利用连接有三联吡啶的柔性四苯基乙烯单元作为富电子连接体与各种氧化还原活性金属中心[Co(II)、Ni(II)和Zn(II)]的完全共轭,深入研究了三种新型共轭配位聚合物(CCPs)的设计与合成。针对每种CCP调整自组装过程,产生了两种不同的形态:纳米片和纳米环。然后将电催化OER性能效率与碱性电解质中的纳米结构形态和氧化还原活性金属中心等因素相关联。值得注意的是,在所研究的三种形态中,每种CCP的纳米环都表现出优异的OER活性。Co(II)整合的CCPs在氧化还原活性金属中心之间表现出更高的活性。具体而言,Co(II)纳米环形态对OER表现出卓越的催化活性,在电流密度为10 mA cm时过电位较低,为347 mV,塔菲尔斜率较小,为115 mV dec。在水分解过程中,相对于可逆氢电极(RHE)在1.57 V下至少24小时证明了其长期耐久性。这大概是第一个将纳米结构形态与氧化还原活性金属中心在提高OER活性方面的重要性联系起来的证据,并且它可能对其他跨学科能量相关应用具有启示意义。