Bendre Hersh H, Rajender Archana, Barbosa Philip V, Wason Shaun E L
Boston Medical Center, Boston University School of Medicine, 725 Albany St., Suite 3B, Boston, MA, 02118, USA.
J Robot Surg. 2020 Dec;14(6):897-902. doi: 10.1007/s11701-020-01072-9. Epub 2020 Apr 2.
Ureteropelvic junction obstruction (UPJO) is an uncommonly encountered pathology, posing a challenge for resident training. We describe the development and face validation of a robotic pyeloplasty simulation using a 3D-printed silicone-based model of UPJO for surgical training, in combination with crowdsourced scoring to objectively assess performance and learning outcomes. The organs were created using 3D modeling software and printed using a silicone-based material by Lazarus 3D, LLC. They were secured in a laparoscopic box trainer and the robotic system was docked. Eight residents and three faculty each performed two robotic-assisted right dismembered pyeloplasties on separate occaisions. Face validity was evaluated on a 5-point Likert scale. Crowd-Sourced Assessment of Technical Skills (C-SATS Inc.) scored surgical performance using the Global Evaluative Assessment of Robotic Skills (GEARS) criteria, based on video review of each simulation. All participants completed the simulation twice with fully patent anastomoses. Average time to complete the first and second trials was 44.4 min and 43.2 min, respectively. The average GEARS score was 17.1 and 17.6 for the first and second trials respectively. Participants improved on average in all 5 GEARS categories, with significant improvement in depth perception (p = 0.006). The model received mean scores (out of 5) of 4.36 for aesthetics, 4.18 for overall feel, 3.55 for realism, 4.72 for usability, and 4.72 for suturability. Residents had a significant increase in confidence between initial and final surveys on a 5-point Likert Scale: 1.63 vs. 2.38 (p = 0.03). Using 3D-printed silicone-based models, participants completed robotic-assisted dismembered pyeloplasties for training and skill acquisition. We demonstrated face validity of the simulation, which was also found to improve participant speed and significantly improve resident confidence. Crowdsourced assessment demonstrated significant improvement in depth perception.
肾盂输尿管连接部梗阻(UPJO)是一种罕见的病理情况,对住院医师培训构成挑战。我们描述了一种用于手术训练的机器人肾盂成形术模拟的开发及表面效度验证,该模拟使用基于3D打印硅胶的UPJO模型,并结合众包评分来客观评估操作表现和学习成果。这些器官使用3D建模软件创建,并由Lazarus 3D有限责任公司使用基于硅胶的材料打印而成。它们被固定在腹腔镜箱式训练器中,机器人系统对接其上。八名住院医师和三名教员分别在不同时间进行了两次机器人辅助的右侧离断性肾盂成形术。表面效度通过5级李克特量表进行评估。基于对每次模拟的视频回顾,众包技术技能评估(C-SATS公司)使用机器人技能全球评估(GEARS)标准对手术操作表现进行评分。所有参与者均成功完成两次模拟,吻合口完全通畅。第一次和第二次试验完成的平均时间分别为44.4分钟和43.2分钟。第一次和第二次试验的GEARS平均得分分别为17.1和17.6。参与者在所有5个GEARS类别上平均都有提高,其中深度感知有显著改善(p = 0.006)。该模型在美学方面的平均得分(满分5分)为4.36,整体感觉为4.18,真实感为3.55,易用性为4.72,可缝合性为4.72。住院医师在初始调查和最终调查之间,在5级李克特量表上的信心有显著提高:1.63对2.38(p = 0.03)。使用基于3D打印硅胶的模型,参与者完成了机器人辅助的离断性肾盂成形术以进行训练和技能获取。我们证明了该模拟的表面效度,还发现它提高了参与者的操作速度并显著增强了住院医师的信心。众包评估显示深度感知有显著改善。