A novel ex vivo trainer for robotic vesicourethral anastomosis.

Robotic surgical skill development is central to training in urology as well as other surgical disciplines. Vesicourethral anastomosis (VUA) in robotic prostatectomy is a challenging task for novices due to delicate tissue and difficult suturing angles. Commercially available, realistic training models are limited. Here, we describe the development and validation of a 3D-printed model of the VUA for ex vivo training using the da Vinci Surgical System. Models of the bladder and urethra were created using 3D-printing technology based on estimations of average in vivo anatomy. 10 surgical residents without prior robotics training were enrolled in the study: 5 residents received structured virtual reality (VR) training on the da Vinci Skills Simulator ("trained"), while the other 5 did not ("untrained"). 4 faculty robotic surgeons trained in robotic urologic oncology ("experts") were also enrolled. Mean (range) completion percentage was 20% (10-30%), 54% (40-70%), and 96% (85-100%) by the untrained, trained, and expert groups, respectively. Anastomosis integrity was rated as excellent (as opposed to moderate or poor) in 40%, 60%, and 100% of untrained, trained, and expert groups, respectively. Face validity (realism) was rated as 8 of 10 on average by the expert surgeons, each of whom rated the model as a superior training tool to digital VR trainers. Content validity (usefulness) was rated as 10 of 10 by all participants. This is the first reported 3D-printed ex vivo trainer for VUA in robotic prostatectomy validated for use in robotic simulation. The addition of 3D-printed ex vivo training to existing digital simulation technologies may augment and improve robotic surgical education in the future.