Suppr超能文献

采用合成氧化锌、氧化石墨烯纳米粒子及其组合有效去除制药废水中的左氧氟沙星。

Effective Removal of Levofloxacin from Pharmaceutical Wastewater Using Synthesized Zinc Oxid, Graphen Oxid Nanoparticles Compared with their Combination.

机构信息

Analytical Chemistry Department, Faculty of Pharmacy, October University for Modern Sciences and Arts (MSA), 11787 6th October City, Cairo, Egypt.

Institute of Nanoscience and Nanotechnology, Kafrelsheikh University, Kafrelsheikh, 33516, Egypt.

出版信息

Sci Rep. 2020 Apr 3;10(1):5914. doi: 10.1038/s41598-020-61742-4.

Abstract

The presence of antibiotic traces in the aquatic system due to the inefficient treatment of the pharmaceutical wastewater represented threats, such as bioaccumulation and antibiotic-resistance, to the environment and human health. Accordingly, for the first time, the current work utilized the photocatalytic degradation and the adsorption approach for Levofloxacin (LEVO) in pharmaceutical wastewater using new designed nano aspects. Therefore, spherical Zinc oxide nanoparticles (ZnONP) sized 17 nm and ultrathin sheet-like structure graphene oxide nanosheets (GONS) with layer thickness ~5 nm were fabricated separately or in a combination between them then characterized via Transmission Electron Microscope (TEM), Scanning Electron Microscope (SEM), X-Ray Diffraction (XRD), Fourier Transforms Infrared Spectroscopy (FTIR), absorption spectra (UV-Vis) and Brunauer-Emmett-Teller (BET). Additionally, several parameters were investigated to evaluate the potential of the removal process, such as pH, the exposure time to UV radiation, the type and concentration of the nanoparticles (NPs) and the initial concentration of the drug using a mixed fractional factorial design. The most effective parameter for LEVO removal was the NPs type followed by the initial drug concentration. Furthermore, an RP-HPLC/UV method was developed and validated for measuring the percentage of removal for LEVO drug. The highest percentage removal for both 50 and 400 µg mL LEVO was 99.2% and 99.6%, respectively, which was achieved using ZnONP/GONS combination at pH 9 ± 0.05 and UV light exposure time 120 min. In addition, the negative antibacterial activity of the treated wastewater sample confirmed the drug removal. The established protocol was successfully applied on wastewater samples collected from a pharmaceutical company that encouraged researchers to mainstream this design to be applied on other pharmaceutical wastewater drugs.

摘要

由于制药废水处理效率低下,抗生素痕迹在水生系统中的存在对环境和人类健康构成了威胁,如生物蓄积和抗生素耐药性。因此,本工作首次利用光催化降解和吸附方法,使用新设计的纳米方法处理制药废水中的左氧氟沙星(LEVO)。为此,分别制备了粒径为 17nm 的球形氧化锌纳米粒子(ZnONP)和厚度约为 5nm 的超薄片状结构氧化石墨烯纳米片(GONS),并对其进行了透射电子显微镜(TEM)、扫描电子显微镜(SEM)、X 射线衍射(XRD)、傅里叶变换红外光谱(FTIR)、吸收光谱(UV-Vis)和 Brunauer-Emmett-Teller(BET)的表征。此外,还通过混合部分因子设计研究了几种参数,以评估去除过程的潜力,如 pH 值、UV 辐射暴露时间、纳米粒子(NPs)的类型和浓度以及药物的初始浓度。对于 LEVO 去除最有效的参数是 NPs 类型,其次是初始药物浓度。此外,还开发并验证了一种反相高效液相色谱/紫外法(RP-HPLC/UV)来测量 LEVO 药物的去除率。在 pH 值为 9±0.05 和 UV 光暴露时间为 120min 的条件下,使用 ZnONP/GONS 组合,对 50 和 400μgmL 的 LEVO 的去除率最高分别为 99.2%和 99.6%。此外,处理后废水样品的负抗菌活性证实了药物的去除。该建立的方案已成功应用于从制药公司收集的废水样品中,这鼓励研究人员将这种设计应用于其他制药废水药物。

https://cdn.ncbi.nlm.nih.gov/pmc/blobs/53ca/7125086/de5ac3b24e1e/41598_2020_61742_Fig1_HTML.jpg

文献检索

告别复杂PubMed语法,用中文像聊天一样搜索,搜遍4000万医学文献。AI智能推荐,让科研检索更轻松。

立即免费搜索

文件翻译

保留排版,准确专业,支持PDF/Word/PPT等文件格式,支持 12+语言互译。

免费翻译文档

深度研究

AI帮你快速写综述,25分钟生成高质量综述,智能提取关键信息,辅助科研写作。

立即免费体验