Fertilization envelope assembly in sea urchin eggs inseminated in Cl- deficient sea water: I. Morphological effects.

Elevation and hardening of the fertilization envelope (FE) occur within 15 min following insemination of the sea urchin egg. When chloride ions were replaced in the media with various anion substitutes, including methyl sulfonate, nitrates, bromide, and isethionate, the fertilization envelope failed to harden and collapsed back to the surface of the egg of Lytechinus variegatus, L. pictus, and Strongylocentrotus purpuratus. At the light microscopy level, the collapse of the envelope was accompanied by a decrease in birefringence, compared with controls. When examined with electron microscopy, the FEs of eggs inseminated in reduced Cl- solutions failed to transform from an amorphous layer into the more robust laminar structure observed around eggs incubated in normal sea water. Furthermore, in the case of S. purpuratus, the I-T transformation of the FE did not occur. When transfer of the inseminated eggs from the Cl- -deficient sea water to normal sea water was carried out before 10 min elapsed, the envelope did not collapse, and the birefringence of the envelope was similar to that of controls. Partial envelope collapse was also observed in a dose-dependent manner, varying with the concentration of the Cl- in the sea water solution. The results suggest that lack of Cl- in the media may interfere with proper fertilization envelope assembly. Possible mechanisms, including proper incorporation of the cortical granule exudate into the nascent envelope structure, are discussed.