Int J Oral Maxillofac Implants. 2020 May/Jun;35(3):521-529. doi: 10.11607/jomi.7899.
To evaluate the resistance to fracture in cantilevered fixed dental prostheses (cFDPs) of single implant-supported zirconia cantilevers in the anterior region.
Thirty-two cemented and solely screw-retained cFDPs consisting of an implant-supported crown replacing the central incisor and an attached cantilever unit in the position of the lateral incisor in the maxilla were constructed by computer-aided design (CAD) and machined by computer-aided manufacturing (CAM). For the cemented solution, a cFDP was designed on top of a customized abutment luted to an adhesive base. For screw-retained cFDPs, abutment, cement gap, and restoration of the cementable design were combined. All cFDPs were veneered manually on the facial side. Half of the samples underwent artificial aging (thermocycling and chewing simulation) before fracture tests were conducted with loads applied to the pontic either parallel to the implant axis (axial loading on the pontic) or tilted lingually by α = 45 degrees (oblique loading on the pontic). Thus, there were eight groups differing in cFDP design, artificial aging, and load application (n = 8/group). If fracture (F) occurred within the implant components, the adhesive base was replaced by a cast CoCr base, and the cFDP's fracture resistance (F) was also determined. Using statistical analyses (SPSS 24, IBM), factors affecting fracture resistance were identified.
F was mainly correlated to screw fractures and therefore not affected by cFDP design. Oblique loading on the pontic (F = 231 N - 352 N), however, led to a significant (P < .001) decrease in ultimate load compared with axial loading on the pontic (F = 611 N - 815 N). In relation to F, F was approximately twice as high for both loading conditions.
When relating the results to maximum occlusal forces exerted in the maxillary anterior region, single implant-supported cFDPs can be a viable restorative treatment option.
评估在前牙区,单种植体支持氧化锆悬臂的悬臂式固定义齿(cFDP)的抗断裂能力。
通过计算机辅助设计(CAD)构建并通过计算机辅助制造(CAM)加工了 32 个粘结的和仅用螺钉固位的 cFDPs,这些 cFDPs由种植体支持的牙冠取代中切牙,以及在上颌侧切牙位置的附着悬臂单元组成。对于粘结解决方案,设计了一个在粘结到粘结基底的定制基台上的 cFDP。对于螺钉固位的 cFDPs,将基台、粘结间隙和可粘结设计的修复体组合在一起。所有的 cFDPs都在颊侧进行了手工贴面。一半的样本在进行断裂试验之前进行了人工老化(热循环和咀嚼模拟),将负荷施加到桥体上,要么与种植体轴平行(桥体轴向负荷),要么倾斜 45 度向舌侧(桥体倾斜负荷)。因此,有 8 个组在 cFDP 设计、人工老化和负荷应用方面存在差异(n = 8/组)。如果断裂(F)发生在种植体部件内,则用铸造 CoCr 基底代替粘结基底,并确定 cFDP 的断裂阻力(F)。使用统计分析(SPSS 24,IBM)确定影响断裂阻力的因素。
F 主要与螺钉断裂有关,因此不受 cFDP 设计的影响。然而,桥体的倾斜负荷(F = 231 N - 352 N)与桥体的轴向负荷(F = 611 N - 815 N)相比,导致极限负荷显著降低(P <.001)。与 F 相比,两种加载情况的 F 大约都增加了一倍。
当将结果与上颌前牙区最大的咬合力相关联时,单种植体支持的 cFDP 可以作为一种可行的修复治疗选择。