Suppr超能文献

用于减重手术程序和设备可靠性评估和工程设计的计算工具。

Computational Tools for the Reliability Assessment and the Engineering Design of Procedures and Devices in Bariatric Surgery.

机构信息

Centre for Mechanics of Biological Materials, University of Padova, Padua, Italy.

Department of Industrial Engineering, University of Padova, Via Venezia, 1, 35131, Padua, Italy.

出版信息

Ann Biomed Eng. 2020 Oct;48(10):2466-2483. doi: 10.1007/s10439-020-02542-9. Epub 2020 May 29.

Abstract

Obesity is one of the main health concerns worldwide. Bariatric Surgery (BS) is the gold standard treatment for severe obesity. Nevertheless, unsatisfactory weight loss and complications can occur. The efficacy of BS is mainly defined on experiential bases; therefore, a more rational approach is required. The here reported activities aim to show the strength of experimental and computational biomechanics in evaluating stomach functionality depending on bariatric procedure. The experimental activities consisted in insufflation tests on samples of swine stomach to assess the pressure-volume behaviour both in pre- and post-surgical configurations. The investigation pertained to two main bariatric procedures: adjustable gastric banding (AGB) and laparoscopic sleeve gastrectomy (LSG). Subsequently, a computational model of the stomach was exploited to validate and to integrate results from experimental activities, as well as to broad the investigation to a wider scenario of surgical procedures and techniques. Furthermore, the computational approach allowed analysing stress and strain fields within stomach tissues because of food ingestion. Such fields elicit mechanical stimulation of gastric receptors, contributing to release satiety signals. Pressure-volume curves assessed stomach capacity and stiffness according to the surgical procedure. Both AGB and LSG proved to reduce stomach capacity and to increase stiffness, with markedly greater effect for LSG. At an internal pressure of 5 kPa, outcomes showed that in pre-surgical configuration the inflated volume was about 1000 mL, after AGB the inflated volume was slightly lower, while after LSG it fell significantly, reaching 100 mL. Computational modelling techniques showed the influence of bariatric intervention on mechanical stimulation of gastric receptors due to food ingestion. AGB markedly enhanced the mechanical stimulation within the fundus region, while LSG significantly reduced stress and strain intensities. Further computational investigations revealed the potentialities of hybrid endoscopic procedures to induce both reduction of stomach capacity and enhancement of gastric receptors mechanical stimulation. In conclusion, biomechanics proved to be useful for the investigation of BS effects. Future exploitations of the biomechanical methods may largely improve BS reliability, efficacy and penetration rate.

摘要

肥胖是全球主要健康问题之一。减重手术(BS)是严重肥胖的金标准治疗方法。然而,不满意的体重减轻和并发症可能会发生。BS 的疗效主要基于经验基础,因此需要更合理的方法。这里报告的活动旨在展示实验和计算生物力学在评估胃功能方面的优势,具体取决于减重手术。实验活动包括对猪胃样本进行充气测试,以评估手术前后胃的压力-容积行为。该研究涉及两种主要的减重手术:可调胃束带术(AGB)和腹腔镜胃袖状切除术(LSG)。随后,利用胃的计算模型来验证和整合实验活动的结果,并将研究扩展到更广泛的手术程序和技术。此外,计算方法允许分析由于食物摄入而引起的胃组织内的应力和应变场。这些场产生对胃受体的机械刺激,有助于释放饱腹感信号。压力-容积曲线根据手术程序评估胃容量和刚度。AGB 和 LSG 均被证明可减小胃容量并增加刚度,LSG 的效果更为显著。在 5kPa 的内部压力下,结果表明,在手术前的配置中,充气体积约为 1000mL,AGB 后充气体积略低,而 LSG 后显著降低,达到 100mL。计算模型技术显示了减重干预对食物摄入引起的胃受体机械刺激的影响。AGB 显著增强了胃底区域的机械刺激,而 LSG 则显著降低了应力和应变强度。进一步的计算研究揭示了混合内镜程序在减小胃容量和增强胃受体机械刺激方面的潜力。总之,生物力学在研究 BS 效果方面是有用的。生物力学方法的未来应用可能会大大提高 BS 的可靠性、疗效和渗透率。

文献检索

告别复杂PubMed语法,用中文像聊天一样搜索,搜遍4000万医学文献。AI智能推荐,让科研检索更轻松。

立即免费搜索

文件翻译

保留排版,准确专业,支持PDF/Word/PPT等文件格式,支持 12+语言互译。

免费翻译文档

深度研究

AI帮你快速写综述,25分钟生成高质量综述,智能提取关键信息,辅助科研写作。

立即免费体验