Suppr超能文献

经食管二维多普勒超声心动图诊断及定量评估房间隔缺损

[Atrial septal defect diagnosed and quantitatively-evaluated by transesophageal two-dimensional Doppler echocardiography].

作者信息

Morimoto K, Matsuzaki M, Tohma Y, Anno Y, Suetsugu M, Ono S, Okada K, Hiro J, Nishimura Y, Michishige H

机构信息

Second Department of Internal Medicine, Yamaguchi University School of Medicine.

出版信息

J Cardiol. 1988 Sep;18(3):813-22.

PMID:3249293
Abstract

Transesophageal two-dimensional (2-D) echocardiography (TEE: horizontal sector scan) combined with the pulsed Doppler method was performed to determine the size of atrial septal defect (ASD) and to measure directly shunt flow signals through the defects in six ASD patients (32 +/- 16 yrs) confirmed by cardiac catheterization. The size of the defect in the horizontal dimension was measured by TEE; the vertical dimension of the defect was determined from the distance of the transesophageal probe positions of the rostral and caudal margins of the defect. The size of defect determined by TEE was compared with that observed at surgery. Shunt flow signals were recorded by the pulsed Doppler technique by setting the sample volume at the center of the defect. Left-to-right shunt flow was determined as follows: shunt flow volume (ml/min) = mean velocity (cm/s) x the area of a defect (cm2) x 60. The shunt flow was compared with that obtained by the Fick's method. In all patients, TEE accomplished unequivocal visualization of a defect. The defect sizes by TEE correlated well with measurements obtained at surgery (r = 0.66). A clear laminar shunt flow with its peak in late systole and atrial systole was observed. Significant correlations were obtained between shunt volumes by TEE and those by the Fick's method (r = 0.91, p less than 0.05). Thus, TEE proved a useful method for diagnosing ASD and for evaluating shunt flow volumes.

摘要

对6例经心导管检查确诊的房间隔缺损(ASD)患者(32±16岁)进行经食管二维(2-D)超声心动图检查(TEE:水平扇形扫描)并结合脉冲多普勒法,以确定房间隔缺损的大小,并直接测量通过缺损的分流信号。通过TEE测量缺损在水平方向的大小;缺损的垂直方向大小由经食管探头在缺损头端和尾端边缘位置的距离确定。将TEE测定的缺损大小与手术中观察到的缺损大小进行比较。通过将取样容积设置在缺损中心,用脉冲多普勒技术记录分流信号。左向右分流如下确定:分流量(ml/min)=平均速度(cm/s)×缺损面积(cm²)×60。将该分流量与通过Fick法获得的分流量进行比较。在所有患者中,TEE均能清晰显示缺损。TEE测定的缺损大小与手术测量结果相关性良好(r = 0.66)。观察到明显的层流分流,其峰值出现在收缩末期和心房收缩期。TEE测定的分流量与Fick法测定的分流量之间存在显著相关性(r = 0.91, p < 0.05)。因此,TEE被证明是诊断ASD和评估分流量的一种有用方法。

文献AI研究员

20分钟写一篇综述,助力文献阅读效率提升50倍。

立即体验

用中文搜PubMed

大模型驱动的PubMed中文搜索引擎

马上搜索

文档翻译

学术文献翻译模型,支持多种主流文档格式。

立即体验