Jiang Xu, Xie Kai, Han Xuequan, Ai Songtao, Wu Haishan, Wang Liao, Yan Mengning
Shanghai Key Laboratory of Orthopedic Implants, Department of Orthopaedic Surgery, Shanghai Ninth People's Hospital, Shanghai Jiao Tong University School of Medicine, Shanghai, People's Republic of China.
Department of Radiology, Shanghai Ninth People's Hospital, Shanghai Jiao Tong University School of Medicine, Shanghai, People's Republic of China.
J Knee Surg. 2022 Jan;35(1):54-60. doi: 10.1055/s-0040-1712945. Epub 2020 Jun 16.
High tibial osteotomy (HTO) is a recognized treatment for early-stage medial compartment knee osteoarthritis. Preoperative planning with standing whole-leg radiographs (WLRs) is essential for ensuring optimal postoperative alignment. The primary purpose of this study is to investigate the theoretical accuracy of the wedge opening required for two different preoperative planning parameters in open-wedge HTO. The second purpose is to theoretically determine which parameter is superior. Preoperative planning for HTO was performed with standing WLRs for 39 knees with isolated medial osteoarthritis. The Miniaci preoperative planning method was applied to correct the hip-knee-ankle (HKA) angle to 3to 6 degrees of valgus and the weight-bearing line (WBL) percentage within 60 to 70% of the width of the tibial plateau. To ensure that the HKA angle was between 3 and 6 degrees of valgus, the required accuracy window for the Miniaci angle was 3.25 ± 0.03 degrees (range, 3.20-3.30°). To ensure that the WBL percentage was between 60 and 70%, the accuracy window required for the Miniaci angle was 2.35 ± 0.13 degrees (range, 2.10-2.65°). This study suggests that to correct the HKA angle and the WBL percentage within the target range on two-dimensional WLRs, the Miniaci angle must be controlled to an accuracy of ± 1.63 and ± 1.18 degrees, respectively. Theoretically, the HKA angle is highly suitable as a preoperative planning parameter for HTO with a large permissible error and a small variability in the degree of change in the Miniaci angle (ΔMiniaci).
高位胫骨截骨术(HTO)是治疗早期膝关节内侧间室骨关节炎的一种公认方法。站立位全腿X线片(WLRs)进行术前规划对于确保术后达到最佳对线至关重要。本研究的主要目的是探讨开放楔形HTO中两种不同术前规划参数所需楔形开口的理论准确性。第二个目的是从理论上确定哪个参数更优。对39例孤立性内侧骨关节炎膝关节采用站立位WLRs进行HTO术前规划。应用Miniaci术前规划方法将髋-膝-踝(HKA)角矫正至外翻3至6度,且负重线(WBL)百分比在胫骨平台宽度的60%至70%范围内。为确保HKA角在3至6度外翻之间,Miniaci角所需的准确窗口为3.25±0.03度(范围为3.20 - 3.30°)。为确保WBL百分比在60%至70%之间,Miniaci角所需的准确窗口为2.35±0.13度(范围为2.10 - 2.65°)。本研究表明,要在二维WLRs上把HKA角和WBL百分比矫正至目标范围内,Miniaci角必须分别控制在±1.63度和±1.18度的精度内。从理论上讲,HKA角非常适合作为HTO的术前规划参数,其允许误差大,Miniaci角变化程度的变异性小(ΔMiniaci)。