Effective nitrogen removal from ammonium-depleted wastewater by partial nitritation and anammox immobilized in granular and thin layer gel carriers.

This study investigates the effect of physicochemical conditions on the partial nitritation and anammox treatment by immobilized ammonia oxidizers under ammonium-deplete conditions. The impact of oxygen and temperature was studied by measuring the activity of immobilized aerobic and anaerobic ammonia-oxidizing organisms (Ammonia-oxidizing bacteria (AOB) and archaea (AOA), and Anammox bacteria) embedded in polyvinyl alcohol - sodium alginate (PVA-SA) beads and in thin layer poly-ethylene glycol hydrogels. Beads and flat hydrogels were incubated in a fluidized bed reactor (FBR) and in two flow cells, respectively. Both systems were fed with synthetic wastewater (15 mg N-NH/L) at different temperatures (20 °C and/or 30 °C) and different dissolved oxygen (DO) concentrations (0.1, 0.3, 0.5 and/or 1 mg/L) over 152 and 207 days, respectively. The FBR system had a maximum removal rate of 1.7 g-N/m/d at 0.1 mg O/L, corresponding to 80% removal efficiency, while a high aerobic ammonia-oxidizing activity but a partial oxygen inhibition of Anammox bacteria were observed at higher DO concentrations. In both flow cells, nitrogen removal efficiency was highest (80%) at 30 °C and 1 mg O/L while removal was less favorable at lower DO and lower temperature. Our results indicate a potential use of hydrogel beads for an energy efficient technology with reduced aeration demand for treating low ammonia wastewater, while layered hydrogels are a possible first step for biological treatments of wastewater using tangential flow. In addition, we provide blueprint drawings of the flow cells, which may be used to 3D-print the apparatus for other applications.