Suppr超能文献

黑暗条件下无空穴传输层金属卤化物钙钛矿电池中的滞后现象研究。

Investigation of hysteresis in hole transport layer free metal halide perovskites cells under dark conditions.

作者信息

Gupta Vishal, Lucarelli Giulia, Castro-Hermosa Sergio, Brown Thomas, Ottavi Marco

机构信息

Department of Electronic Engineering, University of Rome, Tor Vergata, Roma, Italy.

出版信息

Nanotechnology. 2020 Oct 30;31(44):445201. doi: 10.1088/1361-6528/aba713. Epub 2020 Jul 17.

Abstract

Recent research is a testimony to the fact that perovskite material based solar cells are most efficient since they exhibit high power conversion efficiency and low cost of fabrication. Various perovskite materials display hysteresis in their current-voltage characteristic which accounts for memory behaviour. In this paper, we demonstrate efficient non-volatile memory devices based on hybrid organic-inorganic perovskite (CHNHPbI) as a resistive switching layer on a Glass/Indium Tin Oxide (ITO) substrate. Our perovskite solar cells have been developed over the fully solution processed electron transport layer (ETL) which is a combination of SnO and mesoporous (m)-TiO scaffold layers. Hysteresis behaviour was observed in the current-voltage analysis achieving high ratio of ON & OFF current under dark and ambient conditions. Proposed perovskite-based Glass/ITO/SnO/m-TiO/CHNHPbI/Au device has a hole transport layer (HTL) free structure, which is mainly responsible for a large ratio of ON & OFF current. The presence of voids in the scaffold m-TiO layer are also accountable for increasing electron/hole path length which escalates the recombination rate at the surface of the ETL/perovskite interface resulting in large hysteresis in the I-V curve. This memristor device operates at a low energy due to SnO layer's higher electron mobility and wide energy band gap. Our experimental results also show the dependency of voltage scan range & rate of scanning on the hysteresis behaviour in dark conditions. This memristive behaviour of the proposed device depicts drift in hysteresis loop with respect to the number of cycles, which would have a significant impact in neuromorphic applications. Moreover, due to the identical fabrication process of the proposed perovskite-based memristor device and perovskite solar cells, this device could be integrated inside a photovoltaic array to work as a power-on-chip device, where generation and computation could be possible on the same substrate for memory and neuromorphic applications.

摘要

近期研究证明,基于钙钛矿材料的太阳能电池效率最高,因为它们具有高功率转换效率和低成本制造的特点。各种钙钛矿材料在其电流-电压特性中表现出滞后现象,这解释了记忆行为。在本文中,我们展示了基于混合有机-无机钙钛矿(CHNHPbI)的高效非易失性存储器件,该器件作为玻璃/氧化铟锡(ITO)衬底上的电阻开关层。我们的钙钛矿太阳能电池是在完全溶液处理的电子传输层(ETL)上开发的,该电子传输层是SnO和介孔(m)-TiO支架层的组合。在电流-电压分析中观察到滞后行为,在黑暗和环境条件下实现了高的开/关电流比。所提出的基于钙钛矿的玻璃/ITO/SnO/m-TiO/CHNHPbI/Au器件具有无空穴传输层(HTL)结构,这主要是导致高开/关电流比的原因。支架m-TiO层中孔隙的存在也导致电子/空穴路径长度增加,这使得ETL/钙钛矿界面表面的复合率升高,从而导致I-V曲线出现大的滞后现象。由于SnO层具有较高的电子迁移率和宽能带隙,该忆阻器器件在低能量下工作。我们的实验结果还表明,在黑暗条件下,电压扫描范围和扫描速率对滞后行为有依赖性。所提出器件的这种忆阻行为描绘了滞后回线相对于循环次数的漂移,这在神经形态应用中将产生重大影响。此外,由于所提出的基于钙钛矿的忆阻器器件和钙钛矿太阳能电池具有相同的制造工艺,该器件可以集成在光伏阵列中作为片上电源器件,在同一衬底上实现用于存储和神经形态应用的发电和计算。

文献检索

告别复杂PubMed语法,用中文像聊天一样搜索,搜遍4000万医学文献。AI智能推荐,让科研检索更轻松。

立即免费搜索

文件翻译

保留排版,准确专业,支持PDF/Word/PPT等文件格式,支持 12+语言互译。

免费翻译文档

深度研究

AI帮你快速写综述,25分钟生成高质量综述,智能提取关键信息,辅助科研写作。

立即免费体验