Suppr超能文献

在使用压电设备或钻头制备的截骨术中植入物的愈合:犬的实验研究。

Healing at implants installed in osteotomies prepared either with a piezoelectric device or drills: an experimental study in dogs.

机构信息

ARDEC Academy, Viale Giovanni Pascoli 67, Rimini, Italy.

, Nishinomiya City, Hyogo, Japan.

出版信息

Oral Maxillofac Surg. 2021 Mar;25(1):65-73. doi: 10.1007/s10006-020-00895-y. Epub 2020 Aug 15.

Abstract

OBJECTIVE

To compare osseointegration and marginal bone level at implants placed in osteotomies prepared with either conventional drills or a piezoelectric device.

MATERIAL AND METHODS

Three months after the extraction of all mandibular premolars and first molars, two recipient sites were selected. The osteotomies were randomly prepared with either conventional drills (drill sites) or a piezoelectric device (piezoelectric sites). Implants were installed and a submerged healing was allowed. The animals were euthanized in groups of six after 4 and 8 weeks of healing. Biopsies were obtained for histological preparation. Coronal level of osseointegration (bone level) and bone-to-implant contact percentage (BIC%) were evaluated.

RESULTS

After 4 weeks of healing, the bone level was 0.6 ± 0.9 mm for the piezoelectric sites and 1.6 ± 0.7 mm for the drill sites (p = 0.173). After 8 weeks, the respective measures were 0.9 ± 0.3 mm and 1.0 ± 1.1 mm (p = 0.917). After 4 weeks of healing, a new bone apposed onto the implant surface was found at fractions of 54.9 ± 6.7% and 55.1 ± 16.6% for the piezoelectric and the drill sites, respectively (p = 0.674). The respective total bone fractions, including new and old bone, was 64.0 ± 4.8% and 63.4 ± 20.4% (p = 0.917). After 8 weeks, a new bone increased to 67.4 ± 6.7% and 62.9 ± 12.5% for the piezoelectric and the drill sites, respectively (p = 0.463). The respective total bone fractions were 70.4 ± 5.5% and 67.8 ± 12.1% (p = 0.753).

CONCLUSIONS

The use of a piezoelectric device for implant site preparation is a safe procedure that allows a proper integration since the early periods of healing similar to that observed using conventional drills.

摘要

目的

比较使用传统钻头或压电设备制备骨切开术时的骨整合和边缘骨水平。

材料与方法

在下颌前磨牙和第一磨牙全部拔除 3 个月后,选择 2 个受植区。骨切开术随机使用传统钻头(钻头部位)或压电设备(压电部位)制备。植入物安装后进行淹没式愈合。愈合 4 周和 8 周后,每组 6 只动物处死。获取活检进行组织学准备。评估冠状骨整合水平(骨水平)和骨-种植体接触百分比(BIC%)。

结果

愈合 4 周时,压电部位的骨水平为 0.6 ± 0.9mm,钻头部位为 1.6 ± 0.7mm(p=0.173)。愈合 8 周时,相应的测量值分别为 0.9 ± 0.3mm 和 1.0 ± 1.1mm(p=0.917)。愈合 4 周时,压电部位和钻头部位的种植体表面均有新骨附着,分别为 54.9 ± 6.7%和 55.1 ± 16.6%(p=0.674)。包括新骨和旧骨在内的总骨分数分别为 64.0 ± 4.8%和 63.4 ± 20.4%(p=0.917)。愈合 8 周时,新骨分别增加到压电部位和钻头部位的 67.4 ± 6.7%和 62.9 ± 12.5%(p=0.463)。相应的总骨分数分别为 70.4 ± 5.5%和 67.8 ± 12.1%(p=0.753)。

结论

使用压电设备制备种植体部位是一种安全的方法,可在愈合的早期获得适当的整合,与使用传统钻头观察到的情况相似。

文献检索

告别复杂PubMed语法,用中文像聊天一样搜索,搜遍4000万医学文献。AI智能推荐,让科研检索更轻松。

立即免费搜索

文件翻译

保留排版,准确专业,支持PDF/Word/PPT等文件格式,支持 12+语言互译。

免费翻译文档

深度研究

AI帮你快速写综述,25分钟生成高质量综述,智能提取关键信息,辅助科研写作。

立即免费体验