Marinković Stefan, Fernández-Rodríguez Alejandro, Collienne Simon, Alvarez Sylvain Blanco, Melinte Sorin, Maiorov Boris, Rius Gemma, Granados Xavier, Mestres Narcís, Palau Anna, Silhanek Alejandro V
Experimental Physics of Nanostructured Materials, Q-MAT, CESAM, Université de Liège, Sart Tilman, B-4000 Liège, Belgium.
Institut de Ciència de Materials de Barcelona, ICMAB-CSIC, Campus UAB, Bellaterra, 08193 Barcelona, Spain.
ACS Nano. 2020 Sep 22;14(9):11765-11774. doi: 10.1021/acsnano.0c04492. Epub 2020 Aug 12.
The past years have witnessed major advancements in all-electrical doping control on cuprates. In the vast majority of cases, the tuning of charge carrier density has been achieved electric field effect by means of either a ferroelectric polarization or using a dielectric or electrolyte gating. Unfortunately, these approaches are constrained to rather thin superconducting layers and require large electric fields in order to ensure sizable carrier modulations. In this work, we focus on the investigation of oxygen doping in an extended region through current-stimulated oxygen migration in YBaCuO superconducting bridges. The underlying methodology is rather simple and avoids sophisticated nanofabrication process steps and complex electronics. A patterned multiterminal transport bridge configuration allows us to electrically assess the directional counterflow of oxygen atoms and vacancies. Importantly, the emerging propagating front of current-dependent doping δ is probed by optical microscopy and scanning electron microscopy. The resulting imaging techniques, together with photoinduced conductivity and Raman scattering investigations, reveal an inhomogeneous oxygen vacancy distribution with a controllable propagation speed permitting us to estimate the oxygen diffusivity. These findings provide direct evidence that the microscopic mechanism at play in electrical doping of cuprates involves diffusion of oxygen atoms with the applied current. The resulting fine control of the oxygen content would permit a systematic study of complex phase diagrams and the design of electrically addressable devices.
过去几年,铜酸盐全电掺杂控制取得了重大进展。在绝大多数情况下,通过铁电极化或使用介电或电解质门控的电场效应来实现载流子密度的调节。不幸的是,这些方法仅限于相当薄的超导层,并且需要大电场以确保可观的载流子调制。在这项工作中,我们专注于通过电流激发的氧迁移在YBaCuO超导桥的扩展区域中研究氧掺杂。其基本方法相当简单,避免了复杂的纳米制造工艺步骤和复杂的电子设备。图案化的多端传输桥配置使我们能够通过电学方法评估氧原子和空位的定向逆流。重要的是,通过光学显微镜和扫描电子显微镜探测了与电流相关的掺杂δ的新兴传播前沿。由此产生的成像技术,连同光致电导率和拉曼散射研究,揭示了具有可控传播速度的不均匀氧空位分布,使我们能够估计氧扩散率。这些发现提供了直接证据,表明铜酸盐电掺杂中起作用的微观机制涉及氧原子随外加电流的扩散。由此对氧含量的精细控制将允许对复杂相图进行系统研究,并设计可电寻址的器件。