Pharmaceutical Development, Genentech Inc., 1 DNA Way, South San Francisco, California 94080, United States.
Therapeutic Discovery, Amgen Research, Amgen Inc., 1120 Veterans Blvd, South San Francisco, California 94080, United States.
Mol Pharm. 2020 Nov 2;17(11):4354-4363. doi: 10.1021/acs.molpharmaceut.0c00794. Epub 2020 Oct 8.
Polysorbate 20 (PS20) is a commonly used surfactant in biopharmaceutical formulations. It is a heterogeneous surfactant containing a distribution of fatty acid esters, which are subject to hydrolytic degradation, generating free fatty acids (FFAs). The FFAs can form visible or subvisible particles in drug product on stability. A previous FFA solubility model, developed by our group, predicts solubility limits for the three most prevalent FFA degradation products of PS20: lauric, myristic, and palmitic acid. The model takes into account two formulation parameters, pH and PS20 concentration, and their effect on FFA solubility. This work identifies a third parameter that has an impact on FFA solubility: PS20 ester distribution. When PS20 is hydrolytically degraded, the ester distribution of the remaining surfactant changes on stability. Ester distribution is known to influence the critical micelle concentration (CMC) of PS20 such that the monoesters have a much higher CMC compared to the higher-order esters (HOE). We hypothesize that as PS20 degrades, the CMC changes, affecting the proportion of PS20 that is present in micelles and capable of sequestering and solubilizing FFAs in these micelles. Here, PS20 was separated into monoester, HOE, and polyol fractions. The monoester and HOE fractions were mixed together to generate the mock degradation profiles of hydrolytically degraded PS20. FFA solubility was measured as a function of the concentration of these mock-degraded (MD) PS20s. The results indicate that ester distribution does have an impact on FFA solubility, especially at higher MD PS20 concentrations. HOEs solubilize up to 30 μg/mL more lauric acid than an equivalent amount of monoesters at a MD PS20 level of 0.06% w/v. With the addition of % HOE peak area fraction as a third parameter representing the ester distribution of PS20, the refined FFA solubility model more accurately predicts FFA solubility in protein formulations at 5 °C. The refined model suggests that drug products containing trace levels of host cell proteins (HCPs) that preferentially degrade HOEs of PS20 are at a higher risk of particle formation.
聚山梨酯 20(PS20)是生物制药制剂中常用的表面活性剂。它是一种含有脂肪酸酯分布的不均匀表面活性剂,这些酯会发生水解降解,生成游离脂肪酸(FFA)。在稳定性方面,FFA 会在药物产品中形成可见或亚可见颗粒。我们小组之前开发了一个 FFA 溶解度模型,可以预测 PS20 的三种最常见的 FFA 降解产物:月桂酸、肉豆蔻酸和棕榈酸的溶解度极限。该模型考虑了两个制剂参数,pH 值和 PS20 浓度,以及它们对 FFA 溶解度的影响。这项工作确定了第三个影响 FFA 溶解度的参数:PS20 酯分布。当 PS20 发生水解降解时,稳定性下剩余表面活性剂的酯分布会发生变化。酯分布已知会影响 PS20 的临界胶束浓度(CMC),使得单酯的 CMC 远高于高级酯(HOE)。我们假设,随着 PS20 的降解,CMC 会发生变化,从而影响存在于胶束中的 PS20 比例以及能够在这些胶束中隔离和溶解 FFA 的 PS20 比例。在这里,PS20 被分离成单酯、HOE 和多元醇部分。将单酯和 HOE 部分混合在一起,生成水解降解 PS20 的模拟降解曲线。作为这些模拟降解(MD)PS20 浓度的函数,测量 FFA 的溶解度。结果表明,酯分布确实会影响 FFA 的溶解度,尤其是在更高的 MD PS20 浓度下。在 MD PS20 浓度为 0.06%w/v 时,HOE 可溶解高达 30μg/mL 的月桂酸,比等量的单酯多 30μg/mL。随着将 PS20 的酯分布的第三个参数 HOE 峰面积分数添加到模型中,经过修正的 FFA 溶解度模型更准确地预测了 5°C 下蛋白质制剂中的 FFA 溶解度。修正后的模型表明,含有痕量宿主细胞蛋白(HCP)的药物产品更倾向于降解 PS20 的 HOE,因此更容易形成颗粒。