Suppr超能文献

不同基于 Dixon 方法的磁共振肝脏铁评估与经肝活检验证的 R2*弛豫率法的性能比较。

Performance of different Dixon-based methods for MR liver iron assessment in comparison to a biopsy-validated R2* relaxometry method.

机构信息

Department of Radiology, Medical University of Innsbruck, Anichstraße 35, 6020, Innsbruck, Austria.

Department of Internal Medicine, Medical University of Innsbruck, Innsbruck, Austria.

出版信息

Eur Radiol. 2021 Apr;31(4):2252-2262. doi: 10.1007/s00330-020-07291-w. Epub 2020 Sep 23.

Abstract

OBJECTIVES

To prospectively evaluate a 3D-multiecho-Dixon sequence with inline calculation of proton density fat fraction (PDFF) and R2* (qDixon), and an improved version of it (qDixon-WIP), for the MR-quantification of hepatic iron in a clinical setting.

METHODS

Patients with increased serum ferritin underwent 1.5-T MRI of the liver for the evaluation of hepatic iron overload. The imaging protocol for R2* quantification included as follows: (1) a validated, 2D multigradient-echo sequence (initial TE 0.99 ms, R2*-ME-GRE), (2) a 3D-multiecho-Dixon sequence with inline calculation of PDFF and R2* (initial TE 2.38 ms, R2*-qDixon), and optionally (3) a prototype (works-in-progress, WIP) version of the latter (initial TE 1.04 ms, R2*-qDixon-WIP) with improved water/fat separation and noise-corrected parameter fitting. For all sequences, three manually co-registered regions of interest (ROIs) were placed in the liver. R2* values were compared and linear regression analysis and Bland-Altman plots calculated.

RESULTS

Forty-six out of 415 patients showed fat-water (F/W) swap with qDixon and were excluded. A total of 369 patients (mean age 52 years) were included; in 203/369, the optional qDixon-WIP was acquired, which showed no F/W swaps. A strong correlation was found between R2*-ME-GRE and R2*-qDixon (r = 0.92, p < 0.001) with Bland-Altman revealing a mean difference of - 3.82 1/s (SD = 21.26 1/s). Correlation between R2*-GRE-ME and R2*-qDixon-WIP was r = 0.95 (p < 0.001) with Bland-Altman showing a mean difference of - 0.125 1/s (SD = 30.667 1/s).

CONCLUSIONS

The 3D-multiecho-Dixon sequence is a reliable tool to quantify hepatic iron. Results are comparable with established relaxometry methods. Improvements to the original implementation eliminate occasional F/W swaps and limitations regarding maximum R2* values.

KEY POINTS

• The 3D-multiecho-Dixon sequence for 1.5 T is a reliable tool to quantify hepatic iron. • Results of the 3D-multiecho-Dixon sequence are comparable with established relaxometry methods. • An improved version of the 3D-multiecho-Dixon sequence eliminates minor drawbacks.

摘要

目的

前瞻性评估一种具有在线质子密度脂肪分数(PDFF)和 R2*(q Dixon)计算功能的 3D 多回波 Dixon 序列,以及其改进版本(q Dixon-WIP),用于临床肝脏铁定量磁共振成像。

方法

血清铁蛋白升高的患者行肝脏 1.5T MRI 检查,评估肝脏铁过载。用于 R2定量的成像方案包括:(1)经过验证的 2D 多梯度回波序列(初始 TE 0.99ms,R2-ME-GRE),(2)具有在线 PDFF 和 R2计算功能的 3D 多回波 Dixon 序列(初始 TE 2.38ms,R2-q Dixon),以及可选的(3)该序列的原型(工作中,WIP)版本(初始 TE 1.04ms,R2*-q Dixon-WIP),该版本具有改进的水/脂分离和噪声校正参数拟合功能。对于所有序列,在肝脏中手动放置三个手动配准的感兴趣区(ROI)。比较 R2*值并进行线性回归分析和 Bland-Altman 图计算。

结果

415 例患者中有 46 例出现 q Dixon 的脂肪-水(F/W)交换,被排除在外。共纳入 369 例患者(平均年龄 52 岁);其中 203/369 例获得了可选的 q Dixon-WIP,该序列无 F/W 交换。R2*-ME-GRE 与 R2*-q Dixon 之间存在很强的相关性(r = 0.92,p < 0.001),Bland-Altman 显示平均差异为-3.821/s(SD = 21.261/s)。R2*-GRE-ME 与 R2*-q Dixon-WIP 之间的相关性为 r = 0.95(p < 0.001),Bland-Altman 显示平均差异为-0.1251/s(SD = 30.6671/s)。

结论

3D 多回波 Dixon 序列是一种可靠的肝脏铁定量工具。结果与已建立的弛豫定量方法具有可比性。对原始实现的改进消除了偶尔的 F/W 交换和最大 R2*值的限制。

重点

• 1.5T 的 3D 多回波 Dixon 序列是一种可靠的肝脏铁定量工具。• 3D 多回波 Dixon 序列的结果与已建立的弛豫定量方法相当。• 3D 多回波 Dixon 序列的改进版本消除了一些小缺陷。

https://cdn.ncbi.nlm.nih.gov/pmc/blobs/b2d6/7979591/dedc8575e944/330_2020_7291_Fig1_HTML.jpg

文献AI研究员

20分钟写一篇综述,助力文献阅读效率提升50倍。

立即体验

用中文搜PubMed

大模型驱动的PubMed中文搜索引擎

马上搜索

文档翻译

学术文献翻译模型,支持多种主流文档格式。

立即体验