Structural Heart Research & Innovation Laboratory, Carlyle Fraser Heart Center, Emory University Hospital Midtown, Atlanta, Ga.
Structural Heart Research & Innovation Laboratory, Carlyle Fraser Heart Center, Emory University Hospital Midtown, Atlanta, Ga; Division of Cardiothoracic Surgery, Emory University School of Medicine, Atlanta, Ga.
J Thorac Cardiovasc Surg. 2022 Jul;164(1):76-87.e1. doi: 10.1016/j.jtcvs.2020.08.085. Epub 2020 Sep 2.
Surgical annuloplasty for functional tricuspid regurgitation (FTR) is on the rise and can be performed in several ways with varied outcomes. In this study, we sought to compare the hemodynamic outcomes of tricuspid annuloplasty performed with a commercially available annuloplasty ring (tricuspid valve annuloplasty [TVA]) compared with focal suture annuloplasty (Hetzer) in an experimental FTR model.
An ex vivo FTR model was developed by inducing right ventricular dilatation by acute afterload elevation, causing severe tricuspid valve tethering and annular dilatation, leading to regurgitation. Ten porcine hearts in which FTR was induced underwent TVA with a 26-mm Edwards MC3 ring and Hetzer annuloplasty with a pledgeted suture cinching the anteroposterior and septal annulus. FTR was measured before after each repair, and tenting geometry, valve kinematics, and subvalvular geometry were measured with echocardiography.
At baseline, none of the hearts had FTR, but upon afterload elevation an FTR volume of 17.7 ± 9.2 mL (26.38 ± 17.47% regurgitant fraction) was measured (P < .0001). TVA reduced regurgitation by 50% and Hetzer annuloplasty by 56% , respectively, but both left persistent FTR. Anteroseptal tenting area was 279.0 ± 158.9 mm before repair and decreased significantly to 147.2 ± 134.8 mm (P = .0195) with Hetzer but not with TVA. Posteroseptal tenting area was 425.1 ± 169.2 mm before repair and was significantly reduced by both techniques (TVA: 200.3 ± 102.9 mm [P = .0012]; Hetzer: 237.6 ± 127.6 mm [P = .0270]).
Tricuspid annuloplasty with a ring or a focal suture can reduce FTR but not eliminate it. Annular approaches did not relieve tricuspid valve tethering and reduced leaflet mobility persisted. Either subannular repairs or judicious use of valve replacement may be necessary.
功能性三尖瓣反流(FTR)的外科瓣环成形术正在兴起,并且可以通过多种方法进行,其结果也各不相同。本研究旨在比较在实验性 FTR 模型中使用市售瓣环成形环(三尖瓣瓣环成形术 [TVA])与焦点缝合瓣环成形术(Hetzer)进行三尖瓣瓣环成形术的血流动力学结果。
通过急性后负荷升高诱导右心室扩张,导致严重的三尖瓣瓣叶牵拉和瓣环扩张,从而诱发 FTR,建立体外 FTR 模型。10 只诱导 FTR 的猪心接受了 26-mm Edwards MC3 环的 TVA 和带垫片缝线的 Hetzer 瓣环成形术,以收紧前-后和间隔瓣环。在每次修复前后测量 FTR,并用超声心动图测量瓣叶运动学和瓣下几何形状。
在基线时,没有一只猪心存在 FTR,但在后负荷升高时,测量到 FTR 容积为 17.7±9.2ml(反流分数 26.38±17.47%)(P<.0001)。TVA 将反流减少了 50%,Hetzer 瓣环成形术减少了 56%,但两者都持续存在 FTR。修复前前-隔侧瓣叶膨出面积为 279.0±158.9mm,用 Hetzer 显著减少至 147.2±134.8mm(P=.0195),但 TVA 无显著变化。修复前后-隔侧瓣叶膨出面积为 425.1±169.2mm,两种技术均显著减少(TVA:200.3±102.9mm[P=.0012];Hetzer:237.6±127.6mm[P=.0270])。
环或焦点缝线的三尖瓣瓣环成形术可减少 FTR,但不能完全消除。瓣环方法并不能缓解三尖瓣瓣叶的牵拉,瓣叶活动度的降低仍持续存在。可能需要进行瓣下修复或明智地使用瓣膜置换。