Suppr超能文献

45S5 生物活性玻璃和 Er:YAG 激光对氟斑牙微拉伸粘结强度的影响。

The effects of 45S5 bioactive glass and Er:YAG Laser on the microtensile bond strength of fluorosed teeth.

机构信息

Department of Prosthodontics, Hospital of Stomatology Affiliated to Southwest Medical University, Luzhou, Sichuan, China.

出版信息

Microsc Res Tech. 2020 Dec;83(12):1558-1565. doi: 10.1002/jemt.23550. Epub 2020 Jul 31.

Abstract

This vitro study aimed to evaluate the effects of 45S5 bioactive glass (BAG) and Er:YAG laser as desensitization treatments on the microtensile bond strength (MTBS) of fluorosed teeth. The 120 noncarious fluorosis were to obtain superficial dentin, being classified into four groups according to the Thylstrup and Fejerskov Index (TFI). Specimens from each group were randomly divided into five subgroups. After fluorosed teeth hypersensitivity models were established, the following pretreatments were applied on dentine surface: Subgroup 1: deionized water (Control); Subgroup 2: BAG; Subgroup 3: Er:YAG laser; Subgroup 4: BAG + Er:YAG laser, and Subgroup 5: Er:YAG laser + BAG. One sample was randomly selected from each subgroup for scanning electron microscope (SEM). The remaining samples were bonded with composite resin by Adper Single Bond 2 adhesive. Then water bath at 37°C for 24 hr. After 5,000 thermocycling, MTBS was tested and fracture mode was analyzed. The difference of MTBS between BAG group and Control group was found statistically significant (p < .05) in fluorosis. The Er:YAG laser + BAG group showed lowest MTBS values in fluorosis. In conclusion, the pretreatment of BAG might be beneficial to the adhesive of fluorosed teeth. Er:YAG laser desensitization alone or using BAG first and then Er:YAG laser desensitization might not affect the adhesive of fluorosed teeth, while Er:YAG laser desensitization followed by the pretreatment of BAG would be not conducive to the adhesive of fluorosed teeth.

摘要

本体外研究旨在评估 45S5 生物活性玻璃(BAG)和 Er:YAG 激光作为脱敏处理对氟斑牙微拉伸粘结强度(MTBS)的影响。将 120 颗非龋性氟斑牙获得浅层牙本质,根据 Thylstrup 和 Fejerskov 指数(TFI)分为四组。每组标本随机分为 5 个亚组。在建立氟斑牙过敏模型后,在牙本质表面进行以下预处理:亚组 1:去离子水(对照);亚组 2:BAG;亚组 3:Er:YAG 激光;亚组 4:BAG+Er:YAG 激光,亚组 5:Er:YAG 激光+BAG。从每个亚组中随机选择一个样本进行扫描电子显微镜(SEM)检查。其余样本用 Adper Single Bond 2 粘合剂与复合树脂粘结。然后在 37°C 水浴中放置 24 小时。经过 5000 次热循环后,测试 MTBS 值并分析断裂模式。在氟斑牙中,BAG 组与对照组的 MTBS 值差异有统计学意义(p<0.05)。氟斑牙中,Er:YAG 激光+BAG 组的 MTBS 值最低。综上所述,BAG 的预处理可能有利于氟斑牙的粘结。Er:YAG 激光单独脱敏或先用 BAG 后用 Er:YAG 激光脱敏可能不会影响氟斑牙的粘结,而 Er:YAG 激光脱敏后再用 BAG 预处理则不利于氟斑牙的粘结。

文献检索

告别复杂PubMed语法,用中文像聊天一样搜索,搜遍4000万医学文献。AI智能推荐,让科研检索更轻松。

立即免费搜索

文件翻译

保留排版,准确专业,支持PDF/Word/PPT等文件格式,支持 12+语言互译。

免费翻译文档

深度研究

AI帮你快速写综述,25分钟生成高质量综述,智能提取关键信息,辅助科研写作。

立即免费体验