IEEE Trans Biomed Eng. 2021 Jul;68(7):2222-2232. doi: 10.1109/TBME.2020.3042115. Epub 2021 Jun 17.
The current standard of care for peripheral chronic total occlusions involves the manual routing of a guidewire under fluoroscopy. Despite significant improvements in recent decades, navigation remains clinically challenging with high rates of procedural failure and iatrogenic injury. To address this challenge, we present a proof-of-concept robotic guidewire system with forward-viewing ultrasound imaging to allow visualization and maneuverability through complex vasculature.
A 0.035" guidewire-specific ultrasound transducer with matching layer and acoustic backing was designed, fabricated, and characterized. The effect of guidewire motion on signal decorrelation was assessed with simulations and experimentally, driving the development of a synthetic aperture beamforming approach to form images as the transducer is steered on the robotic guidewire. System performance was evaluated by imaging wire targets in water. Finally, proof-of-concept was demonstrated by imaging an ex vivo artery.
The designed custom transducer was fabricated with a center frequency of 15.7 MHz, 45.4% fractional bandwidth, and 31 dB SNR. In imaging 20 μm wire targets at a depth of 6 mm, the lateral -6 dB target width was 0.25 ± 0.03 mm. The 3D artery reconstruction allowed visualization of vessel wall structure and lumen.
Initial proof-of-concept for an ultrasound transducer-tipped steerable guidewire including 3D image formation without an additional sensor to determine guidewire position was demonstrated for a sub-mm system with an integrated ultrasound transducer and a robotically-steered guidewire.
The developed forward-viewing, robotically-steered guidewire may enable navigation through occluded vascular regions that cannot be crossed with current methods.
外周慢性完全闭塞的现行护理标准涉及在透视下手动引导导丝。尽管近几十年来有了重大改进,但导航仍然具有临床挑战性,程序失败率和医源性损伤率很高。为了解决这一挑战,我们提出了一种具有前向超声成像的机器人导丝系统的概念验证,以允许通过复杂的脉管系统进行可视化和操纵。
设计、制造和表征了一种带有匹配层和声学背衬的 0.035"导丝专用超声换能器。通过模拟和实验评估了导丝运动对信号去相关的影响,从而开发了一种合成孔径波束形成方法,以在机器人导丝上引导换能器时形成图像。通过在水中成像线目标评估系统性能。最后,通过对离体动脉成像证明了概念验证。
设计的定制换能器的中心频率为 15.7 MHz,带宽为 45.4%,SNR 为 31 dB。在对深度为 6mm 的 20μm线目标成像时,横向-6dB 目标宽度为 0.25±0.03mm。3D 动脉重建允许可视化血管壁结构和管腔。
对于具有集成超声换能器和机器人引导导丝的亚毫米系统,演示了一种带有 3D 图像形成功能的超声换能器尖端可转向导丝的初步概念验证,而无需额外的传感器来确定导丝位置。
开发的前向、机器人引导导丝可能能够在无法用当前方法穿过的闭塞血管区域进行导航。